Used in Hiroshima, Japan

2000 Kohken Powtech FS-J01-S
- used
- Manufacturer: 粉研パウテック
Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1
Hiroshima, Japan
2007 Buhler SDV 1100
- used
- Manufacturer: ビューラー
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan
2001 [Kurita Machinery Corporation] Filter press
- used
- Manufacturer: 栗田機械製作所
Closed delivery / Hydraulic tightening type. New hydraulic unit required. 500 square x 12 chambers (filtration area approx. 7-8 m2 or so).
Hiroshima, Japan
2007 ADVANTEC STH426FA
- used
- Manufacturer: ADVANTEC
Capacity: 98L, Max. pressure: 0.19MPa Sterilization temperature control range: 105-128°C Sterilization timer: 1 to 250 minutes
Hiroshima, Japan
1991 Mitsubishi Kakoki SJ-30T
- used
- Manufacturer: 三菱化工機
1 set of new spare parts available Disassembly tool is available
Hiroshima, Japan
Tomoe Kogyo P-3400
- used
- Manufacturer: 巴工業
3650rpm / approx. 3000G. Gear ratio 1/165. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1997 Lhasa Industry ATS 600 DS
- used
- Manufacturer: Lhasa Industry
Argyre shifter Material of powder contact part: SUS Motor: 0.4kw The oscillating mechanism is more efficient than the vibrating type. The sifting particles do not bounce on the mesh surface as they do in the vibr...
Hiroshima, Japan
Reaction can 5000L
- used
Material: Wetted parts SUS304. Drive unit is removed and placed separately.
Hiroshima, Japan
［Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea *Made in Korea
- used
- Manufacturer: IDTS800-1 ~ 3
Now in stock. Cassette type Material of powder contacting part：SUS304 Material of base：SS400 Frame diameter: 800 Motor: 0.75kw Tapping ball: φ30 made of silicon This manufacturer has been introduced to many Japan...
Hiroshima, Japan
Tanabe AT-48
- used
- Manufacturer: タナベ
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
2007 IHI IX-36T
- used
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2007 Sekko Sangyo SSR150
- used
- Manufacturer: 世晃産業
18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units
Hiroshima, Japan
2006 uzax 1050l
- used
- Manufacturer: ユザックス
Material: SS | Quantity saved: One
Hiroshima, Japan
2006 Veolia CMF12
- used
- Manufacturer: ヴェオリア
PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...
Hiroshima, Japan
Hosokawa Micron ACM-10
- used
- Manufacturer: ホソカワミクロン
- Model: ACM-10
Grinding: 7.5Kw Classification: 0.75Kw Feed: 0.2Kw
Hiroshima, Japan