Building Filters

Used Grinding Machines in Mie, Japan

Precision Surface Grinder [overhaul machine]
- Manufacturer: Okamoto
- Model: PSG-52
[Overhaul machine] ◆Whetstone: Outer diameter 205 x Thickness 19 x Hole diameter 50.8mm ◆Whetstone no-load rotation speed: (50/60Hz) 3000/3600rpm ◆200/220V ◆50/60Hz ※Whetstone rotation inverter stepless cont...
Mie, Japan
1977 NICCO NSG-550B
- Manufacturer: NICCO
â—† Rotation speed (50Hz) 2,800rpm / (60Hz) 3,400rpm â—† Grinding wheel: Diameter 180 x Thickness 6-32 x Hole diameter: 31.75mm
Mie, Japan
1997 Okamoto PSG-52DX
- Manufacturer: Okamoto
- Model: PSG-52
â—† FX power supply, spindle rotating inverter, overhead dress, front and rear axis digital
Mie, Japan
Diapet DP-620
- Manufacturer: Diapet
â—† Tool length (Ball end mill) Total length 235 / (End mill) 300
Mie, Japan
1995 KENT KGS-410AHD
- Manufacturer: Kent
- Model: KGS-410AHD
â—†With magnetic separator â—†full automatic Â—† table work surface: 1060 Ã— 410 | Â—† table size: 3020 Ã— 504 | Â—† grindable area: 1050 Ã— 420 | Â—† wheel axis rotation speed (60hz): 1740rpm | Â—† wheel dimensi...
Mie, Japan
1996 Hitachi GHL-B409NS
- Manufacturer: Hitachi
- Model: GHL-B409NS
Â—† table work surface: 900 Ã— 400 | Â—† wheel axis rotation speed (60hz): 1800rpm | Â—† machine body weight: 3800kg
Mie, Japan
1985 Kuroda GS-CHA
- Manufacturer: Kuroda
â—† XY: Hydraulic feed Z: Automatic cutting Â—† rated voltage: AC200V | Â—† table dimensions: 550 Ã— 200 | Â—† chuck dimensions (flat type): 500 Ã— 200 Ã— 90mm | Â—† no-load rotation speed: 1800m / min | Â—† whe...
Mie, Japan
1977 Nagase SGW-4
- Manufacturer: Nagase
â—† Stroke (X, Y, Z): S: X470, Y270 Â—† rated voltage: AC200V | Â—† table dimensions: 450 x 200 | Â—† chuck dimensions (flat type): 450 x 150 | Â—† notch specifications: XY automatic | Â—† with or without dresser...
Mie, Japan
1973 Toyoda GUS-30-50
- Manufacturer: Toyoda
Â—†swing: 300 | Â—† center distance: 500 | Â—†maximum grinding diameter: 280 | Â—†wheel size: 355 x 50 width x 127 inside diameter | Â—†center: MT No.4 | Â—† spindle hole diameter: 27mm | Â—† spindle speed: 20 ~...
Mie, Japan
Nagase SGH-600
- Manufacturer: Nagase
Motor 2.2 kW + 1.5 kW + 40 W; 9.8 A + 6.3 A + 0.23 A Electricity 220 V 3 Phase 0.005 Per Up Down Division 0.05 Per Cross Division
Mie, Japan
1985 Toyoda GUP32Ã—50
- Manufacturer: Toyoda
- Model: GUP3250
â—† MT No.4 Â—† swing on the table: 320 | Â—† distance between centers: 500 | Â—† whetstone: Outer diameter Ï†355 x Width 50 x Inner diameter Ï†127 | Â—† spindle rotation speed: 16-500rpm | Â—† required floor are...
Mie, Japan
1974 Kuroda GS-BM
- Manufacturer: Kuroda
- Model: GS-BM
â—† Tiltable permanent magnet chuck GSM-2 ãƒ» 100 Ã— 300 â—† With dust collector â—†grindstone shaft speed 2800rpm
Mie, Japan
1971 Mizuguchi GU-650
- Manufacturer: Mizuguchi
â—† Rated voltage 200V Â—† no-load rotation speed: 1750min-1 | Â—† whetstone dimensions: outer diameter 355Ï† x width 75 x inner diameter 152.4Ï†
Mie, Japan
Brown & Sharpe 612 Micromaster
- Manufacturer: Brown & Sharpe
- Model: Micromaster
Â—† table: 350 X 100
Mie, Japan
IIDA YG-50 Dlill Grinder
- Manufacturer: IIDA
Grindstone rotation:3300/4000rpm, Grinding stone dimensions:φ125*20*φ17
Mie, Japan