Used Drilling Rigs

SCHRAMM T660WS DRILL RIG PACKAGE #10605T

• Manufacturer: Schramm

1998 Schramm 685 derrick and drive head 1989 Mack R60 water truck 1988 Mack RW613 rod 995 GMC fatbed truck (white) 1999 International 8100 with mounted Ingersoll Rand 1170 air compressor 1995 GMC truck with 1999 ...

TRANSEQUIP 4 X BUGGY DRILL RIG AND WATER #4038Tb

Rig has 453 Detroit engine Price: $115,000 for both

155 DRILL RIG #9723T

Manufactured 2007, 4x3 Mission Magnum mud pump, no air, uses 15’ drill pipe, slide out tophead that makes capable of setting 20’ casing with 4’ clearance from the ground, mounted on Ford 650 single axle truck wit...

1972 PORTADRILL 12TK DRILL RIG #3369Ta

• Manufacturer: Portadrill

Manufactured 1972, Detroit 318 engine, 7-1/2” retractable table, 4” x 36’ kelly, chain pulldown, mounted on International 4900 tandem axle truck with 466 DT engine, 10 speed transmission, 400’ of 4-1/2” x 20’ (3-...

SANDVIK D75KS ROTARY DRILL RIG #299T

• Manufacturer: Sandvik

Year 2011, Cat 3412 diesel engine, 100 psi Sullair LLC compressor, mounted on track, fleet maintained and in good condition, inspection report available on request Price $195,000 SANDVIK D25KW CRAWLER DRILL RIG

1974 SPEEDSTAR SS-15THH DRILL RIG #5497T

Manufactured 1974, Leroi 600 cfm air compressor, no mud pump (but plumbed for one), mounted on 4 axle Crane Carrier, 350 Cummins diesel engine, PTO, Fuller transmission, 3 hydraulic leveling jacks, no rod box, no...

1997 DRILTECH D25K DRILL RIG #9486T

• Manufacturer: Driltech

Manufactured 1997, 950/300 air compressor, Cat 575 hp deck engine (rebuilt with only 300 hours), Atlas 2000 casing hammer, no mud, mounted on 1997 Ford truck with diesel engine, carousel and rod box are removed b...

SOILMEC SM-22 DRILL RIG

• Manufacturer: Soilmec

USED Soilmec SM-22 For Sale Price Negotiable Low Hour Weight: Tons 22 Boom articulation type:Joint 90° Clamping range: mm60-370 Diesel engine: kW194 Max feed force: kN140 Max hoist: kN140 Max Torque: daNm3700 Sta...

1997 INGERSOLL-RAND DML1200

• Manufacturer: Ingersoll Rand
• Model: DM-L 1200
• Hours: 1,355 hour

1997 Ingersoll-Rand DML-LP 1200 S/N 7302 Cummins, A/C cab, 35 ft mast, 30 ft drill stem, dust collector, carousel, auto rod changer, 1200 cfm x 110 psi air comp, hyd stabilizers, fire suppression, fast fuel Just ...

CROWN CE900SED SCR DRILL RIG #3976T

• Manufacturer: Crown

Crown Phoenix CE900SED single drum drawworks Lebus grooved f/1-1/4” drill line, p/b (1) 1000 hp traction motor with gblower p/b 10 hp electric motor, Eaton Fuller 238 aux brake, CJZ250 deadline anchor, opertor’s ...

1991 CME 45 AUGER DRILL RIG #10832T

Manufactured 1991, diesel deck engine, mounted on 991 Ford Superduty with diesel engine, in-out slide base, water truck, 3 winches, no angle capability, 2 rear hydraulic leveling jacks Price: $57,500

1980 CME 55 AUGER DRILL RIG #10556T

Manufactured 1980, Ford 6 cylinder engine (rebuilt – 0 hours), Moyno 3L6 pump rercently replaced, all hydraulic pumps rebuilt, feed table rebuilt 4 bearing, chain square drive. Auto hammer rebuilt, new hydraulic ...

2016 CME 55 AUGER DRILL RIG #10551Td

Manufactured 2016, 8000 hours, mounted on 1995 Morooka 1100 (6300 hours) Price: $250,000 USD CME 55HT

1985 CME 550 ATV DRILL RIG #10346T

Manufactured 1985, engine was replaced with a new engine in 2023, completely rewired, started replaced 2024, brakes were removed in preparation for replacement (new brake equipment not yet installed), clutch need...

1987 CME 55 AUGER DRILL RIG #3853Ta

Manufactured 1987, 6 cyl Ford gas engine on deck, mounted on 1987 Single axle International truck with diesel engine, Beam pump, drop hammer, cathead, rebuilt transmission and rear end, 60+' of 4-1/4" Acker auger...

Tamrock Pantera 1100 Drilling Rig

• Manufacturer: Tamrock
• Model: Pantera 1100

Good condition Tamrock Pantera 1100 Drilling Rigs available between 1998 and 2005 years. Located in USA and other countries. Click request price for more information.