Used Atlas-Copco in Poland

Atlas Copco ZT250

• Manufacturer: Atlas-Copco
• Model: ZT 250

Atlas Copco ZT 250 Air Compressor Max pressure 7.5bar Recorded working hours 81,267 MD600A Air Dryer Flow capacity: 37m3/min

Atlas Copco GA11 screw compressor

• Manufacturer: Atlas-Copco
• Model: GA 11

Dimensions: * Length - 1,010mm; * Width - 770mm; * Height - 1,150mm. Technical data: * Manufacturer - Atlas Copco Airpower n.v., Belgium; * Type - GA11P * Year of production - 1996; * Maximum working pressure - ...

Atlas Copco ACTA AAA

• Manufacturer: Atlas-Copco

Atlas Copco ACTA AAA Torque and Angle Measurement System Including 3x torque transducers: 4-5Nm, 25Nm, 75Nm

Atlas Copco ZT 250

• Manufacturer: Atlas-Copco
• Model: ZT 250

Atlas Copco ZT 250 Air Compressor Max. working pressure: 7.5bar Input power: 265kW Operating hours: 107524 Load hours 50876 Flow capacity: 37m3/min

Atlas Copco ZT 250

• Manufacturer: Atlas-Copco
• Model: ZT 250

Atlas Copco ZT 250 Air Compressor Max working pressure 7.5bar Operating hours 110,511 Load hours 46,833 Flow capacity: 37m3/min

Atlas Copco ZT 250 FF

• Manufacturer: Atlas-Copco
• Model: ZT 250

Atlas Copco ZT250FF Air Compressor Max working pressure 7.5bar Flow capacity: 37m3/min

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

Atlas Copco Straight Air Grinders

• Manufacturer: Atlas-Copco

15,000 RPM.

Atlas Copco Straight Air Grinders

• Manufacturer: Atlas-Copco

15,000 RPM

ATLAS COPCO - GA 1108 - Screw Air Compressors - 1988

• Manufacturer: Atlas-Copco
• Model: GA 1108

capacity: 15.54 m3/min, hours: 5670/7506 (doc/general), air-cooled: air

Atlas Copco GTG 40 Type Air Angle Grinders

• Manufacturer: Atlas-Copco

6,000 RPM

Atlas Copco P2541 Pneumatic Needle Descalers

• Manufacturer: Atlas-Copco

Atlas Copco GTG 40 Type Air Angle Grinders

• Manufacturer: Atlas-Copco

6,000 & 6,600 RPM.

Atlas Copco GTG 40 Type Air Angle Grinders

• Manufacturer: Atlas-Copco

6,000 & 6,600 RPM