Used Foundry & Casting in Germany

2006 SEGAB PROMIX 150
- used
- Manufacturer: Segab
Divided daily silo (new sand/regenerate) 2 m³ each, dedusting filter, 2 sand heater separators, sand dosing, batch mixer 150 kg, ColdBox component dosing, core sand distribution car, electric PLC control system
Meinerzhagen, Germany
1999 MICHEL / GTG - Gießereitechnik GÖTZ KSA 700 017
- used
- Manufacturer: MICHEL / GTG - Gießereitechnik GÖTZ
Sand storage hopper, electronic sand scales, stationary 100 kg batch mixer, ColdBox component dosing, sand distribution system, steel support structure (incomplete), PLC control system
Meinerzhagen, Germany
2014 REISSAUS & BAUMBERG KSA 40
- used
- Manufacturer: REISSAUS & BAUMBERG
Shooting volume 40 l, horizontal core box division, core box max. 1250x1050x980 mm, ISS continuous core sand mixer TRITON TS2 (1992), sand hopper, cabin, hydraulic unit, control panel, PLC control SIEMENS S7
Meinerzhagen, Germany
1991 LAEMPE Kernschießautomat L-10 HB
- used
- Manufacturer: Laempe / Röperwerk
Four-column machine, shooting volume 10 l, horizontal/vertical core box divider, clamping & separating device, electric heating plates, discharge carriage, gassing carriage, hydraulic unit, safety cabin, sand hop...
Meinerzhagen, Germany
RÖPER H 2,5
- used
- Manufacturer: Laempe / Röperwerk
Table machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, manual lever control
Meinerzhagen, Germany
RÖPER H 2,5
- used
- Manufacturer: Laempe / Röperwerk
Table-top machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, housing, electric PLC control, two-hand control panel, Co...
Meinerzhagen, Germany
1999 LAEMPE Kernschießautomat LKFZ 40 (L-40)
- used
- Manufacturer: Laempe / Röperwerk
- Model: LKFZ 40
Shooting volume 40 l, vertical/horizontal core box division, core box max. 1000 x 650/1190 x 900 mm, vacuum clamping/separating device, sand hopper, cabin, gassing device, hydraulic unit, core sand mixer SM7_3t/h...
Meinerzhagen, Germany
WEBAC-MICHEL Kugelmischer M 60
- used
- Manufacturer: Webac
Batch max. 60 kg, mixing time 50-70 s, capacity approx. 3 t/h, mixer cover with safety limit switch, cover lifting and swiveling device, pneumatically operated discharge flap, drive power 5.5 kW
Meinerzhagen, Germany
1994 WEBAC-MICHEL Kugelmischer M 30-A-2
- used
- Manufacturer: Webac
Batch mixer 30 kg, steel support structure, two-part sand storage hopper, sand dosing, additive hopper with discharge screw conveyor, liquid component container storage, binder dosing system, 2 discharge points, ...
Meinerzhagen, Germany
1991 KLEIN STATORMIX 53
- used
- Manufacturer: Klein
Batch mixer 50 kg/ 33 l, two-part storage hopper, sand weigher, liquid component container store, dosing station with 2 bellows dosing units, additive dosing, distribution system with overhead conveyor and bucket...
Meinerzhagen, Germany
1978 VOGEL & SCHEMMANN KSM 6.10.02
- used
- Manufacturer: Vogel
Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit
Meinerzhagen, Germany
1989 RÖPER / LAEMPE LKV H 5
- used
- Manufacturer: Laempe / Röperwerk
Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...
Meinerzhagen, Germany
1988 LAEMPE Kernschießautomat L-5
- used
- Manufacturer: Laempe / Röperwerk
Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R
Meinerzhagen, Germany
2013 SEGAB PROMIX 2x 200
- used
- Manufacturer: Segab
Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...
Meinerzhagen, Germany
2014 Eirich FS5
- used
- Manufacturer: Eirich
as a superstructure spinner to be arranged on a flat belt conveyor, belt width 800 mm The sand on the belt conveyor passes through the working area of the rotor. The passing sand is intensively processed and loos...
Frankfurt, Germany