Used extraction in Belgium

Double floor type grinder DÜRRSCHMIDT-VITEX, Ø 760 mm x 76 mm

63 m/s Stone Ø 760 mm, width 76 mm, bore Ø 304.80 mm Drive by cone pulley With 3 speeds With storage space Extraction from the bottom With emergency stop

1990 Core shooter 12 l, VOGEL & SCHEMANN

• Manufacturer: Vogel & Schemann

Type: KSM6.12.HA, CO2/SPS/CV, serial number: KOM19362 N4398 In excellent condition With cabin 2200 mm x 1990 mm, h. 2470 mm Automat SIEMENS SIMATIC S5/100U With sand bunker, extraction slide, ...

Moulding machine HWS, type HSP 2

66 moulding boxes 700 mm x 550 mm, h. 225 mm With: - Sand hopper and extraction belt - Rolling conveyor 8 m - Air tank 1000 l - Electric control by PLC Siemens S5, 100 V

Hopper with dischargingbelt

Bunker with extraction belt for moulding machine ULLRICH + ROSER Content ± 4,3 m³, belt, 650 mm x 600 mm Driven by moto- gearbox and chain Output ± 0,6 m³/min Shaft 1600 x 2000 mm, h. 1950 mm

Coreshooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

With vacuum clamping device, plates 300mm x 200mm With core extraction slide 380mm x 300mm With gassing plate and ejector plate With hydraulic unit Maximum core box dimensions: width ± 700mm, depth ± 650mm, heigh...

Continuous no bake mixer 30 t/h REISAUS & BAUMBERG

Engine: 20 kW, 400 V, 50 HzProjection arm 1: 5500 mmDischarge mixing screw: 2500 mmMotor mixing screw: 18 kWMixing capacity: 30 t / hWith 2 pumps resin / catalysatorWith 2 product containers and retention bacsCon...

Core shooter RÖPER H25 completely hydraulic

• Manufacturer: Laempe / Röperwerk

Shot volume 25l Dimensions (without cabin): Width: 2560mm; Depth: 2000mm; Height: 2800mm With cabin Hydraulic table With hydraulic side clamping With core extraction slide and ejector With hydraulic unit 30bar; 4...

Screw mixer BORDEN, ± 2 t/h with 2 hoppers

With sand hopper, 2 compartments, contenance total ± 2,2 m³ on feet With extraction screw With additive bunker ± 0.22 m³ Wiht dosing screw and impeller The large bunker has 4 pneunamtic metering sliders The meter...

Automatic core shooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

All movements are hydraulic with hydraulic unit Vacuum side clamping, plates 700 mm x 200 mm Core extraction slide 380 mm x 300 mm With gassing plate Maximum core box dimensions: width ± 700 mm, depth ± 650 mm, h...

Semi-automatic moulding line HWS/HSP 1

Serial number: 1190, com. number: 10469 Year of construction: 1995, weight: ± 25000 kg Height 2970 mm Plant equipt by several hydraulic units With rotating table, roller stripping Stroke 200 mm, press stroke 200...

Grinder 1 stone and 1 grinding line MAPE

• Manufacturer: Mape

Type: MR408, serial number: 69-19654 3,5 Kw, 220/380 V, 50 Hz, 1500 rpm With switchbox TELEMECANIQUE Width of band 100mm, without shelf, with one reserve grinding line Stone side with shelf, width 120mm, length 8...

Core shooter RÖPER 2,5 l, turning table - automatic D1A

• Manufacturer: Röper-GENTEN

3-station turntable machine Simultaneous shooting and gassing As soon as the firing is finished, the automatic door opens and the operator can pick up the cores. With new NORGREN valve block With new SIEMENS TIA ...

Vibrating crusher 20 t/h, GENERAL-KINEMATICS, VIBRA-MILL VM160

• Manufacturer: General Kinematics

External dimensions : 3600 mm x 3450 mm, h. 3450 mm (built on its foot) Throughput for sand elemination on a grid (hole Ø 25 mm; oval slots: 90 mm x 15 mm), with cleaning visor, 2290 mm x 400 mm 3 vibrating motor...