Used Mineral Processing

Weir Model 6X500CVX10 Cyclone Cluster

• Manufacturer: Weir

- Two cyclone clusters with manifold distributors - Weir brand model 6X500CVX10 - 10 per bank - 2 banks available - Used for ball mill discharge classification - Removal and loading additional

Krebs 6-Cyclone Manifold/Distributor

- Krebs 6 cyclone manifold - Internal rubber lining - Spare cyclones, apexes, and vortexes available separately - Immediately available from storage

10 x 10 in Linatex Slurry Pumps

• Manufacturer: Linatex

10x10 Linatex Slurry Pumps - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves

12 x 5 ft Outotec Unused Surplus SAG Mill with 350 HP

• Manufacturer: Larox

- Unused surplus Meso Outotec SAG mill - Still in factory packaging - Delivered, never installed or used - 12.1 ft diameter (3.7 m) - 5 ft length (1.5 m) - Trunnion supported mill with ring and pinion gearset - 3...

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

21 x 11 ft Hardinge SAG mill with 2,875 HP

• Manufacturer: Hardinge

21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...

22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills

• Manufacturer: Hardinge

22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP

• Manufacturer: Hardinge

32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...

36 x 17 ft (11x5m) Unused FLS SAG Mill with 18,350 HP (13,5009 kW)

- Unused surplus FLS Fuller-Traylor SAG mill - ABB brand 13,500 kW (18,350 HP) drive - Wrap around style drive motor - Braking system - Complete liner package - Feed chute - Hydraulic jacking system - Specialty t...

New Galigher-Style Vertical Pump, Series 5000

• Manufacturer: Galigher

- Galigher style vertical sump pump - Interchangeable with original Galigher pumps - 5,000 series heavy duty pumps - Natural rubber wear parts - Heavy duty bearing assembly and mechanical components - Belt guard ...

New Galigher Style Series 1000 Vertical Pumps

• Manufacturer: Galigher

- Galigher Style pumps interchangeable with Series 1000 - Totally sealed bearings - Bottom box and top plate coated in vulcanized rubber - Semi-open impeller coated with abrasion-resistant polyurethane - 4140 ste...

Krebs Cyclone model D6B-12-838

3 units available SPARE PARTS (Additional Cost): - 4 each - Inlet Head Liners - 4 each - Liner Top Cover Plate - 4 each - Cylinder Liner - 4 each - Skirt - Urethane - 4 each - Apex Insert - 4 each - Urethane Skir...

Deister No. 6 Concentrating Table

• Manufacturer: Deister

Black rubber covers Handles a variety of feed sizes Handles ores, minerals, crushed slags, and drosses General Model Specifications: MFG. Capacities: Coarse Sand - 2.3 TPH Medium Sand - 1.4 TPH Fine Sand - 0.9 TP...

Action Mining M7 Wave Table

• Manufacturer: Action Mining

80-99% of Gold Recovery from Classified Black Sands 92-99% of Gold Recovery From Small Batches of Classified Black Sands 2 Adjustable Water Spray Bars Table Top and Hopper Constructed of Fiberglass Vacuum-Sealed ...

Dove 4ft x 7.5ft Concentrating Table

• Manufacturer: Dove Equipment and Machinery

Capacity: Voltage: 208-230/460 Volt | Current: 9/8.3/4.15 Amps | Deck design: Rectangular | Deck size: 1.2m x 2.4m (3.93ft x 7.87ft) | Deck material: Wooden Deck | Max feed size: 6mm | Coarse: 0.62 - 3.75 TPH | F...