Used Sanders in Italy

2025 LASM LS-2NSS EDGE SANDER [SP-300007]

• Manufacturer: Volpato - Lasm
• Model: LS

LASM VOLPATO LS-2 NSS Feed Through Top and Bottom Molding Sander with Inverter Controlled Belts Molding sander with (2) opposing abrasive belt units with Inverter control on both sanding heads. The profile sander...

2002 VIET CHALLENGE 211/B RR CALIBRATING SANDER WITH CE STANDARDS

• Manufacturer: Viet
• Model: Challenge

SANDER CALIBRATING MACHINE VIET CHALLENGE 211/B RR TO CE STANDARDS - USED WIDTH MM. 1100 FIRST RUBBER ROLLER DIAM. 180 MM. SECOND RUBBER ROLLER DIAM. 250 MM. DEPRESSOR BELT DEVELOPMENT 2620X1130 MM. ENGINE 18 ...

Delle Vedove SPK4 4 head Sander

• Manufacturer: Delle Vedove

4 Head Delle Vedove Sander with Wheel wear automatic compensation. 2 speed motor forward and backward on each wheel Tested at our factory in Italy

2005 DMC CALIBRATING SANDER MOD. TECHNOSAND TC1100M3 FROM MM. 1100 - CE STANDARDS

DMC CALIBRATING SANDER MOD. TECHNOSAND TC1100M3 FROM MM. 1100 - CE STANDARDS - USED 1 rubber roller diam. 250mm 90sh 18.5Kw 2 rubber roller diam. 250mm 70sh 15Kw 3 rubber roller diam. 330mm 40sh 11Kw n.3 independ...

2025 GARBOLI LT 130 STROKE SANDER (FEED-THRU) [SS-011438]

• Manufacturer: GARBOLI

BRUSA & GARBOLI LT 130 WOODWORKING POLE SANDER Planetary sanding machine with abrasive belts for high volume requirements in which the WORKPIECE DOES NOT ROTATE while abrasive belts spin around it. -- Min. diame...

PEGIC BELT SANDER WITH THREE-PHASE ABRASIVE DISC

• Manufacturer: Pegic

PEGIC BELT SANDER WITH THREE-PHASE ABRASIVE DISC

2004 DMC 3 BELT CALIBRATING SANDER MOD. USK1350 M3 - CE COMPLIANT

3 BELT CALIBRATING SANDER DMC MOD. USK1350 M3 - CE STANDARDS - USED 1 steel roller 2 rubber roller 3 rubber roller No. 3 independent motors working width 1350mm with shoes (short pieces device) blower on the thir...

2007 DMC TECHNOSAND CALIBRATING SANDER MOD. TCK-1100-M3 - CE compliant

DMC CALIBRATING SANDER MOD. TECHNOSAND K TCK1100M3 MM. 1100 – CE STANDARDS - USED roller - 18.5 kw - 90 sh - diam. 250 mm roller - 15.0 kw - 70 sh - diam. 250 mm roller - 11.0 kw - 40 sh - diam. 330 mm n. 3 indep...

CAMAM ORBITAL SANDER MOD. LEC200/AV

• Manufacturer: Camam

CAMAM ORBITAL SANDER MOD. LEC200/AV - USED with feeds volts. 380/50

1996 COSTA CALIBRATING SANDER MOD. 60 CC/2 1150 - CE COMPLIANT

CALIBRATING MACHINE COSTA MOD. 60 CC/2 1150 - A CE STANDARDS - USED working width mm. 1150 roller belt speed adjustable volt. 380/50 matr. 951121/DR3 WITH CE DECLARATION OF CONFORMITY

USED VERTICAL SANDER

USED VERTICAL SANDER

USED HORIZONTAL SANDER

USED HORIZONTAL SANDER

CAMAM ORBITAL SANDER MOD. LEC200/AV

• Manufacturer: Camam

CAMAM ORBITAL SANDER MOD. LEC200/AV - USED with feeds volts. 380/50

Belt sander

Levigatrice a nastro usata Funzionante in ottime condizioni 380 V 2,5 cv Levigatura orizzontale e verticale Lunghezza lavoro nastro verticale 700 mm x altezza rulli 160 mm Lunghezza lavoro nastro orizzontale 650 ...

ARENA Polisher for tiles

• Manufacturer: Arena

Material entry: right | Max workable width: 620 mm | Number of calibrators: 3 | Number of sanders: 2