Used parallel in New Jersey, USA

Agilent/Keysight 6028A

• Manufacturer: Agilent - Keysight
• Model: 6028A

The Agilent 6028A is part of the 601x series of autoranging power supplies which provide maximum power over a wide range of voltage and current combinations without having to manually select the proper output ran...

Agilent/Keysight 34522A

• Manufacturer: Agilent - Keysight
• Model: 34522A

The HP 34522A is a 32-bit digital I/O module, featuring 32 bi-directional TTL-compatible data lines, 8 edge-triggered interrupt lines, 16 high-power FET outputs, and a read/write rate ＞ 40 kHz. The 32 data lines ...

Agilent/Keysight 6294A

• Manufacturer: Agilent - Keysight
• Model: 6294A

The Agilent 6294A is completely transistorized and suitable for either bench or relay rack operation. The 6294A is a compact, well-regulated, Constant Voltage/Constant Current supply that will furnish full rated ...

Agilent/Keysight 6448B

• Manufacturer: Agilent - Keysight
• Model: 6448B

The Agilent HP 6448B is an SCR-regulated supply designed for applications requiring a fixed or variable DC source with moderate regulation and ripple. Large easy-to-read meters continuously monitor the output vol...

Agilent/Keysight 4262A

• Manufacturer: Agilent - Keysight
• Model: 4262A

The 4262A Digital LCR Meter features self-test capability and is designed to measure the parameter of an impedance element with high accuracy and speed. The measurement circuit for the device to be measured is ca...

Agilent/Keysight 8478A

• Manufacturer: Agilent - Keysight
• Model: 8478A

The HP 8478A thermistor mount (thermistor mount was the earlier name for sensor) contain four matched thermistors, and measure power from 10 MHz to 10 and 18 GHz. The two RF-detecting thermistors, bridge-balanced...

Rohde and Schwarz ESIB26

• Manufacturer: Rohde & Schwarz
• Model: ESIB26

High sensitivity Low inherent noise Wide dynamic range High measurement speed Preselection and preamplification Automatic overload detection Autoranging 2nd RF input with pulse protection Correct weighting of pul...

Grizzly G9962ZX - 24" 10 HP 3-Phase Wide-Belt Sander

• Manufacturer: Grizzly

These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9...

Grizzly G9962Z - 24" 10 HP Wide-Belt Sander

• Manufacturer: Grizzly

These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9...

Anritsu MS2602A

• Manufacturer: Anritsu
• Model: MS2602A

The Anritsu MS2602A is one of our modern high-performance spectrum analyzers. It has been designed to meet the needs of a new era of expanded use of frequencies in the quasi-microwave band and the trend toward hi...

LEAP CTC PAL HTS-XT - customized configurations available

ITEM DESCRIPTION PAL HTS-xt system is designed to meet requirements in terms of speed, capacity and precision in the chromatography front end automation. The PAL HTS-xt is the ideal platform for high throughput a...

Agilent/Keysight 6260B

• Manufacturer: Agilent - Keysight
• Model: 6260B

The Agilent 6260B series of constant-voltage/constant-current power supplies achieve high efficiency, excellent regulation, low ripple and noise, and moderate programming speeds in a compact, full rack width pack...

JDS Uniphase SA Series SA-Z432

• Manufacturer: JDSU - Viavi - Acterna

SA-Z432 SA Series Fiber Optic Unit • Component and remote fiber testing • Step-up, step-down channel selection • IEEE 488.1 address selection • Return-to-local function The SA unit is equipped with an IEE...

Agilent/Keysight 6268B

• Manufacturer: Agilent - Keysight
• Model: 6268B

The Agilent 6268B series of constant-voltage/constant-current power supplies achieve high efficiency, excellent regulation, low ripple and noise, and moderate programming speeds in a compact, full rack width pack...

Agilent/Keysight 10567A

• Manufacturer: Agilent - Keysight

The 10567A 50% dual-beam splitter is designed for beam diameters of 6 mm or less. It allows both split beams to return through the splitter, parallel to the incoming beam. It is most useful when the number of opt...