HCTJ-10T Carbon Fiber Bond Strength Tester
A new instrument suitable for testing the tensile bond strength between carbon fiber sheets and concrete in civil engineering structures. According to the bond strength and the failure mode during tension, the te...
Shaoxing, China
HC-GZ40/60 Micro Anvil
The average rate value of the bullet impact test on the micro steel anvil is [N] = 41 ± 2/60 ± 2
Shaoxing, China
HC-V1S/V3S/V5S/V10S Micro Puller
HC-VnS series micro puller is mainly used for anchor force detection of various anchors, such as anchor rods, steel bars and expansion bolts. Its test range is refined, fully in line with the latest standard requ...
Shaoxing, China
HC-BD400 Masonry Flat Top Tester
HC-BD400 masonry flat top instrument is composed of two flat hydraulic jacks, a manual pump, a digital pressure gauge, a reaction frame and a handheld strain gauge. It is mainly used to detect the compressive ela...
Shaoxing, China
HC-DT58/DT52 Pile Dynamic Tester
Product Features HC-DT58： High precision 24 bit A/D data acquisition, high-precision broadband response, and true and clear signal acquisition; 10 inch color high-definition industrial touch screen, lightweight b...
Shaoxing, China
HC-U98/U96/U93 Multi-Channel Ultrasonic Pile Tester
The multi-channel ultrasonic pile tester is a special instrument that uses ultrasonic pulse technology to detect the integrity of concrete foundation piles. The instrument uses a new technology and can complete t...
Shaoxing, China
HC-GZ2 Mortar Rebound Hammer Calibration Anvil
The average rated rebound value of the mortar rebound tester on the Benxi Steel anvil is [N] = 74 ± 2
Shaoxing, China
HC-GY21/GY31 Concrete Rebar Detector
Product Features HC-GY21： Real time display of protective layer thickness and steel reinforcement signal image, with automatic locking of minimum value; Sensor upgrade, significantly improved detection accuracy, ...
Shaoxing, China
HT-450A/550A High Strength Concrete Rebound Tester
Used for structural engineering high-rise building components, concrete components of bridges (plates, beams, columns, bridge frames), usually suitable for concrete compressive strength testing with strength grad...
Shaoxing, China
HT-450J / 450K/KC / 550J / 550K/KC Digital High Strength Rebound Tester Series
HT-450J/450K/KC digital high-strength rebound tester is used for structural engineering high-rise building components, bridges and concrete components (plates, beams, columns, bridge frames), usually suitable for...
Shaoxing, China
HT-225A Concrete Rebound Tester
Non-destructive testing of the compressive strength of concrete structures such as buildings, bridges, and tunnels. Imported high-quality Korean SWP piano steel springs have good anti-rebound performance and are ...
Shaoxing, China
HC-RLT Steel Cage Length Tester
Detect the length of a single section of pipe pile and the total length; Detect the distribution of magnetic induction intensity in the borehole and determine the length of the steel cage according to relevant re...
Shaoxing, China
HC-TH01 Carbonation Depth Meter
HC-TH01 carbonization depth meter can be used with our company's HT-225T series rebound tester, and share the upper computer software for data analysis. This product integrates the company's latest research resul...
Shaoxing, China
HC-GZ3 High Strength Rebound Hammer Calibration Anvil
The average rated rebound value of the high-strength rebound tester on the Benxi steel anvil is [N] = 88 ± 2/83 ± 2
Shaoxing, China
HC-GZ1 Concrete Rebound Tester Calibration Anvil
The average rated rebound value of the concrete rebound tester on the steel anvil is [N] = 80 ± 2
Shaoxing, China
Tip: Enter manufacturer, model or keyword