Used Machine Tools in Saxony, Germany

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 200 x 3-III ( DH200x3-III ) TGL 30-2333 New !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4 ( DH315x4 ) TGL 30-2333 with chuck key used, tested !

WMW ERFURT PYE 160 neuwertig

• Manufacturer: Erfurt

draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diamete...

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW with chuck key used, tested !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW with chuck key used, tested !

RÖHM 2-jaw chuck

• Manufacturer: Röhm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 Jaws individually adjustable by toothing ! used, tested !

HILMA NC 160

• Manufacturer: Hilma

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 65 kg | Space requirements of the machine approx.: m | Span ...