Used Machine Tools in Saxony, Germany

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TC 280 x 900 ( TC280x900 ) 220 / 380 V used, tested !

WMW Drill

• Manufacturer: WMW

Twist drill WMW Ø 69 mm x 425 mm HSS used, tested !

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

FIXATOR level raising range

• Manufacturer: Pagus

Level raising range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with slot 24 mm 1 piece Ø 100 mm x 4 mm, with slot 24 mm 1 piece Ø 100 mm x 5 mm, with slot 24 mm...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 85,0 HSS used, tested ! Diameter: Ø 85.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 480 mm | A-measure: 230 mm | Span length: 255 mm | Dimensions...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 57.0 HSS New ! Diameter: Ø 57.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 423 mm | A-measure: 266 mm | Span length: 230 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 36,0 HSS New ! preserved !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, tested ! with operating instructions !

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

Incluido

• Manufacturer: Pagus

Machine vice PAGUS on rotary table with graduation 360° rotatable

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 200 x 4 ( DH200x4 ) centering Ø: 106 / 102 mm, depth: 20 mm ( conical ) used, tested !