Used Cnc Lathes in Baden-Württemberg, Germany

WEILER E35

• Manufacturer: Weiler
• Model: E35

WEILER E 35 cycle-controlled lathe - circulation over bed 410 via facing slide 200mm - 950 mm center distance - speeds up to 3000 rpm V-constant - machine with chip removal, grooving, thread drilling, thread free...

KEMT GHL30/GH/GS

• Manufacturer: KEMT

Control: FANUC oi-TF, SIEMENS | Storage location: 74196 Neunstadt am Kocher | Turning diameter: 100 mm | Turning length: 100 mm | Machine weight approx.: 1,1-1,2 t

2001 Traub CNC lathe

• Manufacturer: Traub

TNC65DGY, TX8H, year 2001 Show more Traub CNC Lathe TNC65DGY, TX8H, year 2001 2x 10-station turret with rotating tool drive VDI30 C-axisAxis on main/counter spindle Y-axis on turret 1 Hainbuch BZI65 on main/count...

2007 Traub TNX 65/42 CNC bar turning machine

• Manufacturer: Traub
• Model: TNX65/42

Show more Fully functional Traub TNX 65/42 CNC bar turning machine Year of manufacture 2007 Operating hours 36,500 New main spindle bearing 2022 (running time represents the total running time - counter has not b...

2011 Traub CNC lathe TNX65, TX8i-s

• Manufacturer: Traub
• Model: TNX65

Show more Traub CNC lathe TNX65, TX8i-s, year 2011 Description: Main / counter spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, attached tools, 2 x C axis, counter spindle, chip conveyor, belt filter, coo...

2005 Traub CNC lathe TNC65DGY, TX8I

• Manufacturer: Traub
• Model: TNC65DGY

Show more Traub CNC lathe TNC65DGY, TX8I, year of manufacture 2005, serial no. 1130 Machine description Y-axis on S1, V-axis, 2xC-axis, 2xred. Tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and counter spind...

2008 Traub CNC lathe TNA300Y, TX8i

• Manufacturer: Traub
• Model: TNA300Y

Show more Traub CNC lathe TNA300Y, TX8i, year 2008 Y-axis, C-axis, red. Tool drive, VDI30, hollow clamping cylinder 65mm, 185E clamping top 3 jaw chucks Röhm DURO-NCES 215-65/3, LNS Hydrobar, 1 VDI30 turret, tail...

1997 Traub CNC lathe TNA300Y, TX8H

• Manufacturer: Traub
• Model: TNA300Y

Show more Traub CNC lathe TNA300Y, TX8H, year 1997 Y-axis, C-axis, rotating tool drive, VDI30, hollow clamping cylinder 65mm, 3 jaw chucks Röhm DURO-NC 225/3 Id.423752, 1 turret VDI30, tailstock, chip conveyor, f...

2000 Traub CNC lathe TNA300Y, TX8H

• Manufacturer: Traub
• Model: TNA300Y

Show more Traub CNC lathe TNA300Y, TX8H, year 2000 Y-axis, C-axis, rotating tool drive, VDI30, 65mm hollow cylinder, 185 E collet chuck 1 VDI30 turret, tailstock, chip conveyor, LNS Hydrobar Approx. 38,000 produc...

2001 Traub CNC Lathe TNA300Y, TX8H

• Manufacturer: Traub
• Model: TNA300Y

Show more Y-axis, C-axis, red. Tool drive, VDI30 12 stations, hollow clamping cylinder 65mm, 185E clamping top, LNS Quickload Servo 2, 1 turret VDI30, tailstock, 3-jaw chuck KNCS-N-225-65 Chip conveyor with coola...

CNC lathe Gildemeister CTX 510 BJ:04

• Manufacturer: Gildemeister
• Model: CTX 510

2008 Traub TNL 12 TX8i

• Manufacturer: Traub
• Model: TNL12

Show more Traub CNC lathe TNL12, TX8I, year 2008, serial number >750 **6 Description: C-axis, brake on HSP and GSP, red. Tool drive, only run in oil. (No extraction, no tools)

2009 Traub TNX65 TX8i-s

• Manufacturer: Traub
• Model: TNX65

Show more Traub CNC lathe TNX65, TX8i-s, year 2009 Main/counter spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, counter spindle, chip conveyor, belt filter, coolant system, part...

2002 TNK 28/36 TX8i

Show more TNK 28/36 TX8i Year 2002

2014 Irco Breuning ILS MUK-7012-III

• Manufacturer: Breuning - Irco

Show more Irco Breuning ILS MUK-7012-II, built 06-2015 Show more Irco Breuning MUK 7012, built 06-2014 Show more