Used processing

Shake out for furan sand 1000x 1000mm BMF

• Manufacturer: BMF

External dimensions: Length: 3150 mm; Width: 1460 mm; Height: ±1400 mm With control system With 1 spare part motor With dust extraction wall

Furan sand screw mixer IMF 3 t./h.

• Manufacturer: IMF

Screw mixer: Dimensions: 1400mm; Width: 1000mm; Height: ±1900mm with pneumatic slider With 2 pumps driven by mixer motor With control cabinet and Simatic panel

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

Laboratory infrared sand dryer G+F, type SPIT

220 V, 250 Watt With time switch clock Weight: ± 2 kg

Sand aerator

With cone 2089 mm In good working condition Outside dimensions: Length 4200 mm, height 1100 mm | Motor: 10 kW, 1450 rpm, 380/660 V | Weight: 1600 kg

Sand silo ± 5,5 m³, on 3 feet

Useful height 2700mm With dust filter, standing on 3 feet Cone length 2.000mm, tank length 700mm Entry Ø 160mm, exit Ø 150mm, height under cone 2350mm Without ladders, protective grating and drop flap at the exit...

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side With declaration of conformity CE

Monorail sand transport vessel, ± 7,5 l

Translatation via Monorail (KBK2) Motor driven by KONE-CRANES With flat cable Emptying via pneumatic flap

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

1989 Core sand mixer GIETARD, type ZAMIX I, 50 l

3 hp, 1490 rpm, 220/380 V Draining by pneumatic door With safety equipment

Ramigunit for sandlabor GF, SPRA

With accessories for flexion test External dimensions: 300 mm x 200 mm, height 630 mm

Core sand mixer BONIFACE ±50kg

• Manufacturer: BONIFACE

Outer dimensions: length: 1150mm; width: 650mm Internal dimensions: Length: 400mm; Ø520mm Driven by 4 belts, Unloading via hand flap

Core sand mixer BADIE MIXTENSIF, 200 l

• Manufacturer: MIXTENSIF

Inside dimensions: Ø830 mm, depth: 410 mm With pneumatic discharge flap With protective grille

1989 Automatic core sand mixing line STEFFENS

core send mixing plant for cold box smal vibrating convoyor for additifs and intensity regulations Volume testing device Storrge hopper ±250l Pneumatic discharge flap with inspection window and filling level prob...