Used Processing in Lower Silesian, Poland

TECHNO ZK

• Manufacturer: TECHNO

, built in Poland by TECHNO-Wrocław, is used for economical packaging of products in a very short time. We have two units of such machines for sale, the price shown in the advertisement is for one unit.

AMP VBF-60/60/100-1.5

• Manufacturer: AMP

was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long wo...

BATTENFELD BA 600 CDC

• Manufacturer: Battenfeld
• Model: BA 600 CDC

The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...

VICTOR MSZ 30

• Manufacturer: Victor

was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...

ZWUT PSK-1

• Manufacturer: ZWUT

was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...

GT85 GT 2000-3P ultrasonic cleaner

The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...

MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P

• Manufacturer: Mayer

of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

KEPKA CT 900 ET tunnel kiln

• Manufacturer: KEPKA

was built in 2009 in Poland by the Kepka Group. The machine is designed for firing any type of decoration on glass and ceramics at a maximum temperature of 900°C. The working chamber is heated by a system of spir...

WALTER SF 37 KS

• Manufacturer: Walter

The was built by the Polish company WALTER Kompressortechnik in 2014. The 37 kW freestanding screw compressor is equipped with a direct drive and inverter. The capacity at an operating pressure of 10 bar is 5.8 m...

AIRPOL 15

• Manufacturer: Airpol
• Model: 15

The was produced in Poland in 2008. The 15 kW machine has a capacity of 5.8 m3/min at working pressure of 10 bar. The machine motor rotates at 3000 rpm. The total weight of the screw compressor is 340 kg.

PONAR ŻYWIEC SG-180FE-2B

• Manufacturer: PONAR ŻYWIEC

built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main adva...

RUIAN KODA MACHINERY ENG-500

• Manufacturer: RUIAN KODA MACHINERY

, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production l...

MARK RMB 18 IVRD

• Manufacturer: Mark

was built in 2020 in Italy. The machine, consisting of reliable components, a robust housing and an easy-to-use control panel, delivers the highest quality compressed air, free of water vapour that is harmful to ...