- Trusted Seller

1996 GUENTNER GDT 065B/28
- Manufacturer: Güntner
Good ammonia Guentner 2-side blowing evaporator with 2 fans. Mentioned capacity at 7K. Cooling capacity is 50 kW at 10K.
Mijdrecht, Netherlands - Trusted Seller

1995 GOEDHART DVS 62457
- Manufacturer: Goedhart
Very nice dual discharge Goedhart evaporator with hotgas defrost. The evaporators are equipped with two Woods ventilators. These evaporators are perfect for working erea’s or a coldroom.
Mijdrecht, Netherlands - Trusted Seller

2009 GOEDHART VCI-B 81408 G
- Manufacturer: Goedhart
Nice Goedhart evaporator with 1 fan. Mentioned capacity at an evaporating temperature of -8°C and 8K.
Mijdrecht, Netherlands - Trusted Seller

2004 SEARLE KS 20-8
- Manufacturer: Searle
Nice Searle evaporator with 1 fan. Mentioned capacity at an air temperature of 0°C (inlet) and 8K.
Mijdrecht, Netherlands - Trusted Seller
Mijdrecht, Netherlands - Trusted Seller

1998 Schröder KN250/2000-D
- Manufacturer: Schroeder
Scraped surface heat exchanger heater for margarine/emulsion. product pressure upto 50bar. pressure in jacket: up to 9 bar. 1 Product cylinder Tube: Ø 250 mm and length: 200 cm. Rotor Ø 230 mm, spline 10mm, 4 Row...
Lopik, Netherlands - Trusted Seller

2001 GEA Westfalia RAPC 500
- Manufacturer: GEA
Skid mounted double Cip unit, 2 independent CIP units mounted in 1 frame. Each unit exists of: balance vessel 500ltr, Fristam centrifugal pump CIP + pump, Filter and a Plate heat exchanger. Pump details: Fristam...
Lopik, Netherlands - Trusted Seller

2022 KPA S 331A-Z
- Manufacturer: KPA
Sanitary self suction centrifugal liquid ring pump. Current motor: 7.5 kW - 15 A - 1,460 rpm - 50 Hz. Impellor diameter: 225 mm. Pressure: 2.5 bar. Connections: (In) DN80 Din - (Out) DN65 Din. Also available in c...
Lopik, Netherlands - Trusted Seller

Hotwater set
Hotwater set existing out of stainless steel frame, tubular heat exchanger, Sihi Sterling hotwater pump, 60 liter level tank and Samson steam valve.
Lopik, Netherlands 
Heat exchanger with energy recovery
Energy-saving The discharge water from a slide-through machine has a temperature of 50-60°C. Normally, this heat is lost through the drain. The heat exchanger can transfer the heat from the drain water to the inc...
Soest, Netherlands

