Used Heat Exchangers in Japan

Multitubular heat exchanger

Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One

Multitubular heat exchanger

Heat transfer area: Under investigation (10m2?) Material: Wetted part SUS | Quantity saved: One

Multitubular heat exchanger

2 passes. Since there is no documentation, the heat transfer area cannot be determined without removing the mirror and investigating the diameter x number x length of tubes.

Multi-tube heat exchanger, vertical type

Heat transfer area: 4.7 m2 Tube: inner diameter 30mm, length 1240mm Number of tubes: 40 tubes, 400φ, single mirror SUS Heat transfer area: 4.7 m2

［Carbon multi-tube heat exchanger (vertical type)

Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2

2003 [Maeda Iron Works] Multi-tube heat exchanger

• Manufacturer: 前田鉄工所

This heat exchanger cools and condenses vapor generated by a vacuum concentrator (3000-4000 kg/hour evaporation rate). External dimensions: Approx. 1000mm diameter (excluding legs) x 4200mm high, Weight: Approx. ...

[Nisso Engineering] Multi-tube heat exchanger 20m²

• Manufacturer: 日曹エンジニアリング

Heat transfer area: 20㎡ Material: Tube: STB340-SC Shell: SS400

[Sumitomo Chemical Engineering] Multi-tube heat exchanger 20m²

• Manufacturer: 住友ケミカルエンジニアリング

Heat transfer area: 20㎡ Material: Tube: SUS304 Shell: SS400 Drawings available

SEC FK-22-10

• Manufacturer: エスイーシー

Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G

［Tokai Carbon] Carbon capacitor No model

• Manufacturer: Tokai carbon

Heat transfer area: 5.9m2 Quantity saved: 1

1999 Le Carbon Cubic

• Manufacturer: Le Carbon

Cubic type heat transfer area 18.5 m2 Carbon part defective

1990 s.e.c. sh-5622-14

• Manufacturer: SEC

Heat transfer area: 7.74 m2 Material: KCB (copper-nickel alloy) on the tube side Copper side SS41

2008 Tokai Carbon EC25CS2-18

• Manufacturer: Tokai carbon

Heat transfer area: 20.2 m2 on both sides A and B Design temperature: 150°C on A side, 50°C on B side Carbon part defective. The defective part has been identified. New parts can be replaced.

2008 Izumi Food Machinery NPW30F06-042-6-H type

• Manufacturer: イズミフードマシナリー

Tubes in shell-and-tube heat exchanger replaced by All welded plate & tube heat exchangers Shell and tube heat exchanger Material is under investigation

1991 Carbon capacitor

Heat resistance temperature: 360°C Withstand pressure: 0.5MPa(75PSIG) Heat Transfer Area: Unknown (Approx. 10㎡ based on size)