Machine Tools » Milling Machines » Universal Milling Machines » Saxony

Search By Manufacturer

Building Filters

44

Used Universal Milling Machines in Saxony, Germany

  • Trusted Seller
    1984 WMW FUW 315/5

    1984 WMW FUW 315/5

    • Manufacturer: WMW
    • Model: FUW 315/5
    • Power requirement: 7.4 kilowatt

    Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: ...

    Leipzig, Germany
  • Trusted Seller
    1977 SHW UF 21

    1977 SHW UF 21

    • Manufacturer: SHW
    • Model: UF 21
    • Power requirement: 10 kilowatt

    Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes...

    Leipzig, Germany
  • Trusted Seller
    1996 Hermle UWF 851 H

    1996 Hermle UWF 851 H

    • Manufacturer: Hermle
    • Model: UWF 851

    Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre c...

    Leipzig, Germany
  • Trusted Seller
    1980 WMW "FRITZ HECKERT" FU

    1980 WMW "FRITZ HECKERT" FU 315 V/2

    • Manufacturer: Heckert

    Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x...

    Leipzig, Germany
  • Trusted Seller
    1986 WMW FW 4.5

    1986 WMW FW 4.5

    • Manufacturer: WMW
    • Power requirement: 14.5 kilowatt

    Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice)

    Leipzig, Germany
  • Trusted Seller
    1989 Deckel FP 2A

    1989 Deckel FP 2A

    • Manufacturer: Deckel / Maho
    • Model: FP 2
    • Power requirement: 10 kilowatt

    Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power.

    Leipzig, Germany
  • Trusted Seller
    1992 MAHO MH 800 W

    1992 MAHO MH 800 W

    • Manufacturer: Maho
    • Model: MH 800
    • Power requirement: 9.6 kilowatt

    The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual ...

    Leipzig, Germany
  • Trusted Seller
    Maho MH 800

    Maho MH 800

    • Manufacturer: Maho
    • Model: MH 800
    • Power requirement: 6.5 kilowatt

    Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice

    Leipzig, Germany
  • Trusted Seller
    1976 WEYRAUCH F10-V

    1976 WEYRAUCH F10-V

    • Manufacturer: WEYRAUCH
    • Power requirement: 1.17 kilowatt

    Machine table feed 15 - 230 mm/min. via 12 steps Equipment: Sauter workpiece holder with 2 stations (Ø 125 mm and Ø 32 x 26 mm journals), hydraulic operation Coolant system Control panel; hand crank

    Leipzig, Germany
  • Trusted Seller
    WMW Ruhla FUW 200-II

    WMW Ruhla FUW 200-II

    • Manufacturer: Ruhla
    • Model: FUW 200
    • Power requirement: 4 kilowatt

    Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling...

    Leipzig, Germany
  • Trusted Seller
    1975 MAHO MH 500

    1975 MAHO MH 500

    • Manufacturer: Maho
    • Model: MH 500
    • Power requirement: 1.6 kilowatt

    Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display He...

    Leipzig, Germany
  • Trusted Seller
    1970 STANKOIMPORT 6M82

    1970 STANKOIMPORT 6M82

    • Manufacturer: Stankoimport

    Coolant system 2x counter bearing arbor holder Ø 18 / Ø 60 mm and other accessories in the tool cabinet. i.D.

    Leipzig, Germany
  • Trusted Seller
    1992 Hermle UWF 900 W

    1992 Hermle UWF 900 W

    • Manufacturer: Hermle
    • Model: UWF 900
    • Power requirement: 13 kilowatt

    Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin

    Leipzig, Germany
  • Trusted Seller
    1975 MAHO MH 500

    1975 MAHO MH 500

    • Manufacturer: Maho
    • Model: MH 500
    • Power requirement: 1.5 kilowatt

    Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display He...

    Leipzig, Germany
  • Trusted Seller
    1978 FIL FU 120

    1978 FIL FU 120

    • Manufacturer: FIL
    • Model: FU 120
    • Power requirement: 25 kilowatt

    Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device - equipped with measuring system manufacturer Millvision

    Leipzig, Germany
123

Overview

Universal milling machines are versatile and durable machines used in various milling applications. They are capable of performing both horizontal and vertical milling operations and can handle complex, multi-axis tasks. These machines are ideal for producing precise parts in manufacturing and industrial settings, offering flexibility and efficiency in machining operations.

FAQ

What should I look for when purchasing a used universal milling machine?

Check the machine's overall condition, including wear on the spindle and table. Verify the accuracy of its movement and inspect any included tooling. Maintenance records are also important to review.

How can I safely ship a universal milling machine?

Use a specialized heavy machinery transport service. Ensure the machine is properly secured and protected with appropriate packaging materials to prevent damage during transit.

What maintenance is required for a universal milling machine?

Regular maintenance includes lubricating moving parts, checking and adjusting the alignment, and cleaning the machine to prevent debris buildup. Refer to the manufacturer’s manual for specific maintenance intervals and procedures.