Used Saws in Indiana, USA

Elumatic MGS72 Elu Miter Cut Off Saw 12" Circular Blade 3Ph 230V 3460RPM Mitre

• Manufacturer: Elu

Used, in Good Working Condition, Tested OK. For 230V. Only Heavy duty stand 45 cuts. Pneumatic air hold down clamps If this item ships as Flat Rate Freight please see details in Shipping tab

Everett 16-MIT Cut Off Abrasive Metal Saw 16" Blade Exhaust Blower 10Hp 3210RPM

• Manufacturer: Everett

Used, in Good Working Condition, Tested. This is a working cut off saw. 16" blade. 230/460V 10 Hp main motor. Has a blower motor. 1 hp motor with a 16" centrifugal fan. Inside of cabinet is rusting through the bo...

Brown Master 10" Manual Cold Cut Miter Metal Saw 850/1700RPM 460V 3Ph

• Manufacturer: Brown Master

Used, in Good Working Condition. Tested. Looks like it was setup to run with an automation system. No handle no clamp for material. Motor is 460V only. Looks to be 2 speed. 850-1700 rpm. 10" blade. Almost looks l...

Cut Off Abrasive Metal Saw 18" Blade 2485RPM Cast Iron Base 7.5Hp 230/480V Chop

Used, in Good Working Condition. Model 18 No brand. Made in Japan. 18" Blade. Made for abrasive blade. Looks like they were cutting aluminum with a carbide blade. Can cut angles. Cast iron base. This has a brake ...

Omga T521ST 18-20" Wood Cut Off Saw 5.6kw Upcut Pneumatic Control 230/460V 3Ph

• Manufacturer: Omga

Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 500mm blade which is basicly a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cr...

Powermatic Model 66 Table Saw 10" Tilting Arbor 3 Phase 5 HP 240/480V 52" Fence

• Manufacturer: Powermatic
• Model: MODEL 66

Used, in Good Working Condition, Tested. If this item ships as Flat Rate Freight please see details in Shipping tab

Delta 34-803 Unisaw Table Saw 10" Tilting Arbor 3Ph 3 HP 240/480V 57" Fence

• Manufacturer: Delta

Used, in Good Working Condition. Removed From a Working Environment Tested. 3 phase wired for 460V. Blade guard has some defects. Fence is setup for 57" max. Extension rods to make it 57" Shipping length could be...

Omga T521ST 18-20" Wood Cut Off Saw 6 Hp Upcut Pneumatic Control 230/460V 3Ph

• Manufacturer: Omga

Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cross cut max. This is for straig...

LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph

• Manufacturer: LeTarte

Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab

Sampson SC Metal Cut Off Chop Saw 3500RPM 12" Blade 3Hp 230/460V Aluminum

• Manufacturer: Sampson

Used, in Good Working Condition. Removed From a Working Environment. This was used to cut aluminum. This is wired for 460V. Blade is carbide. The RPMs are close to 3500. Foot pedal operator. Air cylinder to cycle...

Delta Rockwell Vintage Radial Arm Saw 12" Blade 3Hp Motor 20" Rip 230/460V 3Ph

• Manufacturer: Rockwell

Used, in Working Condition, Tested OK. This saw does not come with a bench top. This saw is wired for 480V. Motor can be wired for 220/440V. 1" arbor No all adjustments are free. Main ones are. If this item ships...

CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...

CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...