Building Filters

Used Injection Molding in Texas, USA

Trusted Seller
950 Ton, 156 Oz., Mitsubishi Injection Molding Machine w/ Yushin Robot
- used
- Manufacturer: Mitsubishi
- Model: 950MMJW-160
Model: 950MMJW-160 | Us tonnage: 950 | Shot size (oz. of ps): 156 | Platen size (in.): 70.9 x 70.9 | Tiebar spacing (hxv) in.: 51.2 x 47.2 | Max mold height (in.): 43.3 | Min mold height (in.): 19.7 | Opening st...
Stafford, TX
Trusted Seller
2000 125 Ton ENGEL ES 330H/125VRB Vertical Injection Molding Machine
- used
- Manufacturer: Engel
2000 125 Ton ENGEL ES 330H/125VRB Vertical Clamp - Horizontal Injection - Rotary Table Shot size: 5 Oz Screw Diameter: 35 mm Platen Size: 17.7" x 31.9" Table Diameter: 46.5" Hours: 4,346 Machine is in good...
Texas, USA
Trusted Seller
2004 100 Ton ENGEL IN 330H/100 US Vertical Injection Molding machine
- used
- Manufacturer: Engel
2004 100 Ton ENGEL IN 330H/100 US: Vertical Clamp - Horizontal Injection Shot size: 6.5 Oz Screw size: 25 mm Platen size: 13.39 x 23.23 Hours: 49,603 Table Diameter: 47" Machine is in good running conditio...
Texas, USA
Cincinnati Milacron 75-Ton Toggle Injection Molding Machine Recipro Screw Design
- used
- Manufacturer: Cincinnati
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor Cincinnati Milacron 75-Ton Toggle Injection Molding Machine Recipro Screw Design Manufacturer: Cincinnati Milacron Model: 75 Ton 6 oz. ...
$6,000 USD
Get financing
Est. $118/mo
Leander, TX
DME Injection Mold Base with Plates and Ejector 15" x 15" x 12" No.1 Steel
- used
- Manufacturer: DME
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor DME Injection Mold Base with Plates and Ejector 15" x 15" x 12" No.1 Steel Manufacturer: DME Model: DOES NOT APPLY Condition: Used We g...
$10,000 USD
Get financing
Est. $196/mo
Leander, TX
DME Injection Mold Base with Plates and Ejector 20" x 17-13/16" x 13.5" Steel 3
- used
- Manufacturer: DME
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor DME Injection Mold Base with Plates and Ejector 20" x 17-13/16" x 13.5" Steel 3 Manufacturer: DME Model: DOES NOT APPLY Condition: Used...
$20,000 USD
Get financing
Est. $393/mo
Leander, TX
DME Injection Mold Base with Plates and Ejector 20" x 17-13/16" x 13-7/16" Steel
- used
- Manufacturer: DME
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor DME Injection Mold Base with Plates and Ejector 20" x 17-13/16" x 13-7/16" Steel Manufacturer: DME Model: DOES NOT APPLY Condition: Use...
$20,000 USD
Get financing
Est. $393/mo
Leander, TX
DME Injection Mold Base with Ejector & Plates 14-7/8" x 12" x 11-7/8" No.1 Steel
- used
- Manufacturer: DME
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor DME Injection Mold Base with Ejector & Plates 14-7/8" x 12" x 11-7/8" No.1 Steel Manufacturer: DME Model: DOES NOT APPLY Condition: Use...
$10,000 USD
Get financing
Est. $196/mo
Leander, TX
DME Injection Mold Base with Plates 29-7/16" x 12-7/8" x 13-3/8" No.1 Steel
- used
- Manufacturer: DME
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor DME Injection Mold Base with Plates 29-7/16" x 12-7/8" x 13-3/8" No.1 Steel Manufacturer: DME Model: DOES NOT APPLY Condition: Used We ...
$15,000 USD
Get financing
Est. $295/mo
Leander, TX
Auction
INJECTION MOLDING MACHINE, BOY 50 (Located at: RSP Plastics, Inc., 118 Bedford Dr., Cuero, TX 77954)
- used
- Manufacturer: Bedford
INJECTION MOLDING MACHINE, BOY 50 (Located at: RSP Plastics, Inc., 118 Bedford Dr., Cuero, TX 77954)
Cuero, TX
Visit Auction Website
Trusted Seller
2005 720 Ton Nissei FV9100
- used
- Manufacturer: Nissei
- Model: FV9100
2005 720 Ton Nissei FV9100 Injection Molding Machine: Shot size: 135 Oz. Screw diameter: 100 mm Tie bar spacing: 43.3" x 43.3" Platen Size: 60.6" x 60.6" Max. Open daylight: 75.2" Machine is under power and...
Texas, USA
Trusted Seller
2004 618 Ton Nissei FV9000
- used
- Manufacturer: Nissei
- Model: FV9000
2004 618 Ton Nissei FV9000 Injection Molding Machine: Shot size: 105 Oz. Screw diameter: 90 mm Tie bar spacing: 38.2" x 38.2" Platen Size: 53.5" x 53.5" Max. Open daylight: 71.3" Machine is under power and ...
Texas, USA
Trusted Seller
2020 496 US Ton JSW J450DS-1400H All electric Double Toggle
- used
- Manufacturer: JSW
- Model: J450DS-1400H
New in 2020 496 US Ton JSW All electric Double Toggle Injection molding machine: Shot size: 43.7 Oz. Tie bar spacing: 35.43” x 31.87” Platen size: 51.18” x 47.64” Max. Open daylight: 66.93” Control: Syscom50...
Texas, USA
Trusted Seller
2019 826 Ton Sumitomo Demag EL-Exis SP multi 750-1600h/1600h (2 Color)
- used
- Manufacturer: Demag
2 Color 2019 826 Ton Sumitomo Demag EL-Exis SP multi 750-1600h/1600h: Primary Shot Size: 13.65 Oz. Secondary Shot Size: 13.65 Oz. Tie Bar Spacing: 44.09" x 44.09" Platen Size: 63.77" x 63.77" Max. Open dayl...
Texas, USA
Trusted Seller
V1250-M-760 INJECTION MOLDED BARREL T168726
- used
Warranty Information This is a used item, in good condition and includes a 30 day warranty. Sold as is, as pictured.
$399 USD
El Paso, TX
Krauss-Maffei KM250-1400C2 Injection Molding
- used
- Manufacturer: Krauss-Maffei
- Model: KM250-1400C2
Good condition Krauss-Maffei KM250-1400C2 Injection Moldings manufactured in 1997. Located in USA and other countries. Click request price for more information.
USA