Semiconductors » Deposition Equipment (CVD, PVD) » Bavaria

Building Filters

11

Used Deposition Equipment (Cvd, Pvd) in Bavaria, Germany

2007 Applied Materials P5000 17
- used
- Manufacturer: Amat
- Model: P5000
P5000 17 Area: CVD | Equ. grp code: 83404 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_RS_8 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P5000 | Q...
Regensburg, Germany
2012 Applied Materials P5000 9
- used
- Manufacturer: Amat
- Model: P5000
P5000 9 Area: CVD | Equ. grp code: 79404 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_K_RS_GAN_6 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P500...
Regensburg, Germany
2006 AMAT AMAT EPI CENTURA
- used
- Manufacturer: Amat
- Model: Centura
Software Ver: B6.50 CB1 Amps: 300A Vita Controller Flow Point Model: Nano Valve Gas Panel Type: Configurable Wafer Size: 200mm (with conversion kit 150mm is possible) M-Monitor: CRT 3 Chambers ATM EPI With digita...
Regensburg, Germany
2000 AMAT Centura EPI 8 inch
- used
- Manufacturer: Amat
- Model: Centura
The system was completely overhauled by us with external service AMAT on site at that time!; Blower controls upgraded every 3 chambers; Approximately 4 years ago the Complete Gas Cabinet was upgraded from Legaty ...
Regensburg, Germany
2007 Applied Materials P5000 20
- used
- Manufacturer: Amat
- Model: P5000
P5000 20 Area: DEP | Equ. grp code: 73401 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_K_6 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P5000 | Qt...
Regensburg, Germany
2003 Applied Materials 200mm Centura II
- used
- Manufacturer: Amat
- Model: Centura
Centura MF II Software: Vita Controller Indexer: Narrow Body / Tilt out mit Dummy Wafer Storage Robot: HP+ Chamber: A -> DPS+ B -> DPS+ C -> IPS D -> ASP+ E -> Single Cooldown F -> Orienter
Regensburg, Germany
2007 Applied Materials P5000 21
- used
- Manufacturer: Amat
- Model: P5000
P5000 21 Area: DEP | Equ. grp code: 79402 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_K_RS_6 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P5000 |...
Regensburg, Germany
2023 AMAT EPI Centura ACP
- used
- Manufacturer: Amat
- Model: Centura
Brand new and unused EPI Centura ACP 300 mm 4 Chambers; Chamber code RH3, Lamp type BNA8 R3Mainframe Configuration E4 Single, 4 Facet SC ENP BLK2, Loadport AMAT Standard 300mm, EPI Water Module LT Design. RP EPI...
Regensburg, Germany
1997 Applied Materials P5000 34
- used
- Manufacturer: Amat
- Model: P5000
P5000 34 Toolcode sending site: P500034 | Ifx et id:: 255050 | Area: PET | Eqtoolcode sending sitep500034ifx et id:255050areapetequ. grp code78222workcenter (equ. grp. name)p_an_pol_p5000_k_6completeness fully...
Regensburg, Germany
Ulvac
- new
- Manufacturer: Ulvac
CME-200E/400 is the most suitable model in the PE-CVD series production system for deposition of Si films with application as Insulator or barrier layers. High-density plasma process with high-frequency (27.12 MH...
Munich, Germany
Ulvac
- new
- Manufacturer: Ulvac
The SME Series (SME-200) is a series of space-saving, low-cost cluster-type sputtering systems ideal for SAW devices and compound semiconductors.The SME-series lets you create a highly cost-effective line tailore...
Munich, Germany