Used Gearboxes & Transmissions in Saxony, Germany

Gotha transmission plant Two-stage gearbox

Two-stage gearbox, gearbox, two-stage Gotha transmission plant SÜU11BA01 i1 = 17,43 i2 = 8,6 Input: Shaft diameter: Ø 45 mm, shaft length: 90 mm, groove width: 14 mm Pulley: Diameter: Ø 275 mm, groove width: 10 m...

BONFIGLIOLI Gearbox

• Manufacturer: Bonfiglioli

Gearboxes, angular gearboxes BONFIGLIOLI HDP70 2 LP LL XAD 200 i = 19,4 New !

BONFIGLIOLI Gearbox

• Manufacturer: Bonfiglioli

Gearboxes, angular gearboxes BONFIGLIOLI HDP70 2 LP RR XAD 200 i = 19,4 New !

MERGER gearbox

MERGER ( PRL3-1900 ) New ! Translation: i=85.613 | Shaft diameter a (outside): 55 mm | Well diameter b (inside): 140 mm | Dimensions: 1410x500x820 mm

ZAE gearbox

Gearbox ZAE ( 125F1300/65 ) i = 20 with fan ! used, checked !

SUMITOMO gearbox

• Manufacturer: Sumitomo

Cycloidal gearbox, Cyclo-Gear SUMITOMO F3CS-A45G-29 FA45-29 F9BC929 i = 29 New !

STOBER gearboxes

Gearboxes STÖBER DRIVE TECHNOLOGY K903SF0850MQ40 i = 84,810 Can be used left and right ! New !

SEW gearbox

Gearbox SEW FH97B/II2GD EDRN180L4/3D/TF/AL/C i: 1 : 11,16 Shaft length: 345 mm, with shaft end for shrink disk: Ø 95 mm Ex-protected ! New !

ALPHA planetary gearbox

Planetary gearbox ALPHA TP 110G-MF2-25 - OK1-2S ( TP110G-MF2-25-OK1-2S ) 20047642 279724/30 i = 25 38 mm Spare part for S537 ! New !

PAGUS planetary gearbox

• Manufacturer: Pagus

Planetary gearboxes, Gearboxes PAGUS Ø 570 x 255 Drive: 4x threaded hole: M12 x 1.75, depth: 30 mm Housing: Flange diameter: Ø 505 / 570 mm, flange thickness: 70 mm 24x hole: Ø 18.1 mm, continuous, with blind hol...

LENZE DISCO variable speed gearbox

• Manufacturer: Lenze

DISCO variable speed gearbox, gearbox, variable / adjustable LENZE Type 11.705.06.08 200 - 35 rpm ( with servomotor ) Gear drive: Type 52.144.08.11 Input shaft: Diameter: Ø 25 mm, shaft length: 50 mm, groove widt...

VIGODRIVE robot gearbox

Robot gearboxes, cycloidal gears, robot accessories VIGODRIVE A97-0218-0305/37 RV-27C-36.57 P21L009-00 used, tested !

WMW feed gearbox

• Manufacturer: WMW

Feed gearbox WMW One revolution of the gear wheel causes 2/3 revolutions of the shaft Drive shaft: Internal splined shaft profile: Diameter: Ø 13 / 17 mm, depth: 75 mm for splined shaft: 4 splines, width: 8 mm Ac...

PAGUS robot gearbox

• Manufacturer: Pagus

Robot gearboxes, cycloidal gears, robot accessories PAGUS 0590364 toothed belt wheel: Ø 125 mm, width: 32 mm used, tested !

PEISELER turner with worm gearbox

Turning device with worm gear, turning clamp PEISELER AWUP 200 Gear ratio: 72 : 1 Drive: Hollow shaft diameter: Ø 22 mm shaft length: 45 mm, groove width: 8 mm used, tested !