Used Processing in Japan

Trusted Seller
Vacuum Furnace
- used
- Manufacturer: Kurata Technology
This furnace creates a vacuum inside the furnace and heat treats materials such as metals and ceramics. It can reach temperatures up to 3,000 degrees. It also has an exhaust gas combustion device.
Toda, Japan
Trusted Seller
1997 KOBELCO AS3P
- used
- Manufacturer: コベルコ
- Model: AS3P
A compact size compressor with casters that supports a variety of layouts.
Toda, Japan
Trusted Seller
202" (5150MM) VOITH / VALMET / IHI PAPER MACHINE
- used
- Manufacturer: Valmet
- Model: PAPER MACHINE
One (1) Used 202" (5150mm) Paper Machine (GSM: 40-100g/m2) Manufacturer: VOITH / VALMET /IHI Installation year: 1990 3P Shoe Press(Sleeve resin):Voith ,Year 2011 Stopped year: 2023 GSM: 40-100g/m2 Productio...
Japan
Trusted Seller
2021 ORION QSQ180D-E
- used
- Manufacturer: Orion
Machine Specifications Non-CFC, heatless adsorption type air dryer ○Processing volume Dew point -20 to -40 degrees Celsius Inlet air volume 1.80 - 1.53m3/min Outlet air volume 1.54 - 1.27m3/min Dimensions Dimensi...
Tokyo, Japan
Trusted Seller
2012 HAITIAN JU16000/31000J
- used
- Manufacturer: HAITIAN
Screw dia: 90mm | Piston screw dia: 200mm | Shot volume: 33615cm3 | Distance between tie rods: 1550mm x 1450mm
Chiba, Japan
Trusted Seller
2001 JSW J150EⅢ
- used
- Manufacturer: JSW
- Model: J150E
Screw dia: 46mm | Shot volume: 30cm3 | Distance between tie rods: 510x510mm | Mold thickness: 220~450mm | Daylight opening: 890mm
Chiba, Japan
Trusted Seller
2001 MITSUBISHI 3500MMⅢ-1100
- used
- Manufacturer: Mitsubishi
Screw dia: 200mm | Shot volume: 31400cm3 | Platen size: 2550mm x 2450mm | Distance between tie rods: 2000mm x 1800mm | Max daylight: 3700mm | Max clamp stroke: 2700mm | Mold thickness: 1000~1900mm | Shipping mas...
Chiba, Japan
Trusted Seller
2016 AIRMAN PDS670SD-4C5
- used
- Manufacturer: Hokuetsu Kogyo
Hours: 3531H | Specification: 0.7MPa.TRAILER TYPE
Chiba, Japan
Trusted Seller
2005 TOSHIBA IS850GT-81A
- used
- Manufacturer: Toshiba
- Model: IS850
Screw dia: 105mm | Shot volume: 4320cm3 | Distance between tie rods: 1060x1060mm | Platen size: 1530x1530mm | Daylight opening: 2250mm
Chiba, Japan
Trusted Seller
2005 NIIGATA ALL ELECTRIC MD450S-IV
- used
- Manufacturer: Niigata
- Model: MD450
Screw dia: 76mm | Shot volume: 1588cm3 | Distance between tie rods: 810x810 | Daylight opening: 1550mm
Chiba, Japan
Trusted Seller
1999 AIRMAN PDSK900S
- used
- Manufacturer: HOKUETSU
Hours: 5977H | Specification: ENGINE: S6B3
Chiba, Japan
Trusted Seller
CKD GX5211D-AC200V
- used
- Manufacturer: SDK
Machine Specifications Comments from Sales Maintenance situation: Present condition delivery
Tokyo, Japan
Trusted Seller
2004 markem corporation 590t
- used
- Manufacturer: Markem
- Model: 590T
Machine Specifications Desktop Silicon Pad Printing Machine Comment from Sales
Tokyo, Japan
Trusted Seller
2003 Hitachi Industrial Equipment Systems SRL-3.7DA5
- used
- Manufacturer: Hitachi Industrial Equipment Systems
- Model: SRL-3.7DA5
Machine Specifications ○ Power source Three-phase 200V [for 50Hz] Oil-free/low noise/scroll type ○ Capacity Output 3.7kw, Max. pressure 0.83MPa Discharge air volume 400L/min Ambient temperature 5～40°C Noise level...
Tokyo, Japan
Trusted Seller
2021 Hitachi Industrial Equipment Systems ST-230C
- used
- Manufacturer: Hitachi Industrial Equipment Systems
Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.
Tokyo, Japan
Hitachi SRL-3.7DA5 Industrial Compressor
- used
- Manufacturer: Hitachi
- Model: SRL-3.7DA5
Good condition Hitachi SRL-3.7DA5 Industrial Compressors manufactured in 2003. Located in Japan and other countries. Click request price for more information.
Japan