Used Processing in Hiroshima, Japan

2004 Hitachi Zosen TFAP-10-18MKII

• Manufacturer: Hitachi

Fully automatic compression type 1000mm x 18 chambers Unmaintained, but in fairly good condition Complete books and control panel available Filtration area: 26.6 m2 Filtration volume: 306 L

2011 Japan H-Classifier PFM-8C

• Manufacturer: Japan Filter

Filter plate: 800 square x 8 chambers Total filtration area: approx. 8 m2 Total filtration volume: approx. 160 L Cake thickness: 25mm Huffing pressure: 0.4MPa Squeeze pressure: 0.5MPa

Japan Filtration System 390m/m x 9 chambers ES2C type

• Manufacturer: Japanese filtration equipment

Specifications: Huffing area: approx. 2 m2 Huffing capacity: approx. 15L Cake thickness 15mm Huffing pressure 0.4MPa Tightening pressure 50MPa Remarks:[High pressure]. Maximum working pressure 72MPa Discharge vol...

2001 Irie Shokai PBV-1000

• Manufacturer: Irie Chamber of Commerce

Total capacity 1L / Finishing capacity 0.7L Rotation speed 15-35 rpm Heater (temperature control)

3500L Cylindrical vertical type

Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available

Red Bam Engineering VSP - 25P

• Manufacturer: Akitake Engineering

Powder Conveying System, Sanitary Specifications (Conveying Piping 2S) Suction volume: 2500L/hr Air drive

2007 Anlet BE80E

• Manufacturer: Anlet

Air volume: 5 m3 / min Pressure: 55 kPa With materials

2017 Chikara Engineering HANG48×800

• Manufacturer: Tikara Engineering

Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel

Alfa Laval AFPX407

• Manufacturer: Alfa-Laval
• Model: AFPX

Concentrator AFPX407BGP-74-60 Power: 7.5kw 4P200V | Material: Wetted part SUS | Quantity saved: One

2003 Tetra Pak DMRPX407

• Manufacturer: Tetra Pak

11kw clarifier Control panel/disassembly tool/Instruction manual available DMRPX407SGP-34

2008 Westphalia OTC3-02-137

• Manufacturer: Westphalia

Purifier with hand-pushed cart Material: Wetted part SUS | Quantity saved: One

Kansai Centrifuge M-04

• Manufacturer: Kansai centrifuge

Two-phase separation Motor: 1.5kw Wetted parts material: SUS Rotation speed: 20,000 rpm Sealed box with temperature regulator Model: M-04NO,U-4-HR

1989 Tanaka Giken Industry AE 55 × 22

• Manufacturer: Giken

55-inch SUS Fully automatic type Hydraulic unit (0.75kw) Basket capacity: 430L Rotation speed: 900rpm Centrifugal effect: 600G The entire machine is disassembled and serviced at our maintenance shop, so you can b...

Tanabe 42-inch

• Manufacturer: Tanabe

42", top discharge type, perforated type. Basket SUS, others SS.

Kurimoto Tekko RG 2560

• Manufacturer: Kurimoto Ironworker

Double roll (clearance adjustable) Power: 11 kW 6 P 200 V | Material: Gluing section SUS | Quantity saved: 1 | Size: φ 250 x 600 L x 2