Used machine tools

GFM SX 06 Radial Forging Machine

• used

• Manufacturer: GFM

Forging force: 80 Ton | Number of hammers: 4 | Number of strokes per minute: 1,200/minute | Range of shift on diameter: 35 mm | Forging eccentric: 3 mm | Firing hammer length: 150 mm | Basic material maximum dia...

H280/V180 – 3500 Ring Rolling Machine

• used

Outside diameter of finished ring: 600 - 3,500 mm | Height of finished ring blank for mandrel diameter 2,200 mm: 100 - 800 mm | Height of ring blank (min / max): 240 / 800 mm | Ratio of wall thickness to height:...

Kaltek 6300 Ring Rolling Mill

• used

• Manufacturer: Kaltek

Outside diameter of finished ring: 1,200 - 6,300 mm | Height of finished ring: 80 - 1,000 mm | Inside diameter of ring blank for mandrel diameter - 300mm: min 320 mm | Height of ring blank: max 1,050 mm | Ring w...

4" National Upset Forging Machine - Re:24376

• used

• Manufacturer: National

Equipped with Air Clutch & Brake The machine is available for inspection at our Cleveland, Ohio warehouse on request.

3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925

• used

• Manufacturer: Asian Built

Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...

1995 740 ton AMD model 740-2630 Bar & Billet Shear,

• used

• Manufacturer: AMD

Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs

9" National High-Duty Heavy Upset Forging Machine (Upsetter) - has never been cracked, Re:24440

• used

• Manufacturer: National

Location: Our Cleveland, Ohio Rebuild Facility - in storage and available for inspection. Very good working condition

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

• used

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

2012 INDUCTOTHERM VIP POWER TRAK

• used

• Manufacturer: Inductotherm

Inductotherm VIP Power Trak, 75 KW, 3200 HZ, 100 Lift Swing

2005 INDUCTOTHERM VIP POWER TRAK 750-10CR

• used

• Manufacturer: Inductotherm

Inductotherm Induction Melting Furnace, VIP Power Trak 750-10CR, 750 Kw, 1200 Hz, 6000 Lb Duraline Hydraulic Tilting Box

Vintage Blacksmith Post

• used

5.5" Jaws

Johnson Gas Appliance 370,000 BTU Propane Kiln

• used

• Manufacturer: Johnson

Furnace no. 133 forge, s/n: 464-A

Double-Spout Smelting Ladle

• used

51" Long

Roemheld 1545105 Block Cylinder

• new

• Manufacturer: Roemheld