- Trusted SellerAuction
Mississauga, CanadaVisit Auction Website - Trusted SellerAuction
Mississauga, CanadaVisit Auction Website - Trusted SellerAuction
Mississauga, CanadaVisit Auction Website - Trusted Seller

ALLEN 2 Spindle Drill Press
- Manufacturer: Allen
Allen 2 Spindle Drill Press PRELIMINARY SPECIFICATIONS Power Downfeed on each Spindle Head
Elk Grove Village, IL - Trusted SellerAuction
Toronto, CanadaVisit Auction Website - Trusted SellerAuction
Toronto, CanadaVisit Auction Website - Trusted SellerAuctionYork, PAVisit Auction Website

56" x 21" Allen 4 Station Drill Press
- Manufacturer: Allen
TABLE LENGTH/WIDTH 56â x 21â Chuck Distance 7â-12â to table Variable speed for each head 220-480v 2hp motors for each head Model A012?
Posen, IL- Trusted Seller

ALVA ALLEN BD3
- Manufacturer: Allen
- Capacity: 3 kilogram
Tonnage: 3 | Stroke: 3/4" | Motor: 1 HP Baldor | Electrics: 115/208-230 1725 RPM 60HZ | Dimensions: 32" L x 48" W x 58" H on stand | Equipped with: Foot Pedal
Ivyland, PA - Trusted Seller

Allen 30" Die Drill
- Manufacturer: Allen
S# 26632, 5" Spindle travel, 34" x 25" Heavy table, 3 Power down feeds .003/.006/.010, Spindle speeds are 1/4 of normal with gear motor on it, 4 Speeds from 85 to 500 rpm would be 340 to 2,000 rpm with 1,200 rpm ...
$1,500 USDMinneapolis, MN - Trusted Seller

ALVA ALLEN B 3 Ton
- Manufacturer: Allen
- Capacity: 3 kilogram
Tonnage: 3 | Stroke: 3/4" | Motor: 1/2 HP Baldor | Electrics: 115/230 1725 RPM 60HZ | Dimensions: 31" L x 21" W x 52" H on stand | Equipped with: Foot Pedal
Ivyland, PA - Trusted Seller

ALVA ALLEN B 3 Ton
- Manufacturer: Allen
- Capacity: 3 kilogram
Tonnage: 3 | Stroke: 3/4" | Motor: 1/2 HP Baldor | Electrics: 115/230 1725 RPM 60HZ | Dimensions: 35" L x 20" W x 50" H on stand | Equipped with: Foot Pedal
Ivyland, PA - Auction

Chas. Allen Floor Standing Drill Press
- Manufacturer: Allen
#3MT Spindle, Assorted Chucks, 26-1/2" x 21" Table, 240-2400 RPM, 2 HP, 480 Volt, Approx. 34" x 48" x 85" Overall. A $100 Load Fee will be Automatically Added to Your Invoice.
La Crosse, WIVisit Auction Website - Trusted Seller

Allen 19" Dual Head
- Manufacturer: Allen
High speed head on one head 9 speeds from 500 to 4,580 rpm, 1/32" to 1/2" Albright keyless chuck, Powered down feed, Max daylight under spindle is 11"/could be raised if you add spacer under head, 5" Spindle trav...
$1,750 USDMinneapolis, MN - Trusted Seller
Alva Allen BT25 Mechanical OBI Punch Press 25 Ton 2-1/2" Stroke 8" Throat 3Ph
- Manufacturer: Allen
Ram Bolt Distance (Center to Center) (Inches): 8-1/2" Throat Opening (Frame to Center of Ram) (Inches): 8" Used, in Good Working Condition, Tested OK. This has a 9" wide open back. Has a plastic shield now. One o...
$5,400 USDMillersburg, IN

