Used printing in Saxony, Germany

2021 dmsDIGITAL 375PRO+375KF

Year of construction 2021 Equipment details here ready for demonstration in the showroom

Folding Machine Hesse+Co GmbH

• Manufacturer: Hesse

Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is mis...

2004 RAS 64.25

• Manufacturer: RAS
• Model: 6425

Hydraulic Folding Machine, electronically controlled. -max. sheet thickness at 400 N/mm² 2,5 mm according to manufacturer -smallest permissible bending radius 1.25 x sheet thickness -opening of the upper beam max...

WMW SBM 1000-1

• Manufacturer: WMW

- This swivel bending machine is equipped with two rear supports. Size of the round steel support = Ø 25 x 750mm, with linear scale. - Left side with counterweight.

1988 Strojaren XONM 2000/2A-5

• Manufacturer: Strojaren

HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam ...

1992 Stückmann&Hillen 241 05

• Manufacturer: Stückmann&Hillen

This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters

1982 FASTI 2045 - 15/1,5

• Manufacturer: Fasti
• Model: 2045 - 1515

- adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (peda...