- Trusted Seller
(7) ASSORTED SMALL DIAMETER BORING BARS FOR LATHE
used
Detailed description coming soon. --------------------------------------------------------------- Terms & Conditions Buyer's Premium Each lot purchased will be subject to a buyer fee of 6%. Additional buyer’s...
Odessa, TX 
LEHMANN HOLLOW SPINDLE OIL COUNTRY ENGINE LATHE
used
- Manufacturer: Lehmann
- Spindle Bore: 7”
Price $ 54,500. FOB Houston, TX. Subject to prior sale
Houston, TX- Trusted Seller
2018 DMG MORI 32/8
used
- Manufacturer: DMG Mori
The 2018 DMG Mori Sprint 32/8 is a high-performance CNC screw machine built for precision, speed, and versatility in complex small-part production. Featuring an 8-axis configuration with 6 linear axes and 2 C-axe...
Houston, TX - Trusted Seller
2018 DMG MORI 32/8
used
- Manufacturer: DMG Mori
The 2018 DMG Mori Sprint 32/8 is a high-performance CNC screw machine built for precision, speed, and versatility in complex small-part production. Featuring an 8-axis configuration with 6 linear axes and 2 C-axe...
Houston, TX 
2007 VANTAGE HOLLOW SPINDLE OIL COUNTRY ENGINE LATHE
used
- Manufacturer: VANTAGE
- Spindle Bore: 12.5”
- Spindle Nose: A-2-20
Ratio of two speed quill 1:1 and 4:1 each range gear changed by air power. - Hardened and ground bed and cross slide ways, lubrication with adjustable timer control pump. - 6-way rapid traverse and fe...
2008 VANTAGE HOLLOW SPINDLE OIL COUNTRY ENGINE LATHE
used
- Manufacturer: VANTAGE
- Spindle Bore: 12.5”
- Spindle Nose: A-2-20
Ratio of two speed quill 1:1 and 4:1 each range gear changed by air power. - Hardened and ground bed and cross slide ways, lubrication with adjustable timer control pump. - 6-way rapid traverse and fe...
- Trusted Seller
27" X 226" Used Axelson Hollow Spindle Engine Lathe
used
- Manufacturer: AXELSON
27" X 226" Used Axelson Hollow Spindle Engine Lathe Swing Over Bed Ways 27-5/8" Swing Over Cross Slide 19-1/2" Center Distance 226" Spindle Hole 8-5/8" Spindle Speeds 6 To 500 Rpm's Chuck Size W/8-5/8"Hole Front ...
Navasota, TX - Trusted Seller
32" X 295 Okuma Heavy Duty Engine Lathe
used
- Manufacturer: Okuma
32" X 295 Okuma Heavy Duty Engine Lathe Swing Over Bed Ways 32" Swing Over Cross Slide 19-1/2" Width Of Bed Ways 29" Center Distance 295" Spindle Hole 2-3/4" Spindle Speeds 4.5 To 750 Rpm's Chuck Size 24" 4-Jaw F...
Navasota, TX - Trusted Seller
20" X 102 Used American Pacemaker Engine Lathe Model 20
used
- Manufacturer: AMERICAN
20" X 102 Used American Pacemaker Engine Lathe Model 20 Swing Over Bed Ways 25" Swing Over Cross Slide 16" Compound Travel 4" Carriage Length On Bed 26-3/4" Center Distance 102" Spindle Hole 2" Spindle Speeds (27...
Navasota, TX FANUC Robot 10i-A 12
new
- Manufacturer: Fanuc
FANUC Robot 10i-A 12 Robot Arm / Floor Demo Unit *Gripper not included The FANUC M-10iA/12 R-30iB is a small but mighty performance handling robot that can tackle up to 12kg. This robot comes with the advanced R-...
YANTRANG VGH-6 Lathes
new
- Manufacturer: YANTRANG
- Spindle Bore: 4"
ImperialMetricNEW YANTRANG 36" x 13' HEAVY DUTY ENGINE LATHE MODEL VGH-6 center height 457mm (18"). spindle height 100mm (4"). WIDTH OF BED 457mm. (18") BED Hardened Bed Ways SPINDLE NOSE A2-8 Type MAIN SPINDLE S...
Sugar Land, TX- Trusted Seller
Like New Condition 2013 KINGSTON HD2690 Not more than 40 hours
used
- Manufacturer: Kingston
- Model: HD2690
- Spindle Bore: 4.09"
STANDARD EQUIPMENT & ACCESSORIES • Main Motor: 15 HP HD-26 230V / 460V, 3 Phase, 60 Cycle, Switch & Wiring • 4.09" Spindle Bore • Spindle Nose: D1-11 HD-26 • 12 Spindle Speeds (13 – 1,200 RPM) • Wye Delta S...
- Trusted Seller
2012 Haas ST-40LB with Long Bed, 6.5" Bar Cap., Steady Rest Provision, Manual Steady Rest, 18" Hyd Chuck, Conveyor, Tailstock
used
- Manufacturer: Haas
- Model: ST-40
- Spindle Nose: A2-11" / 7.1" / 6.5"
80" Long Bed Option 7" Big Bore Spindle Option with 6.5" Bar Capacity 18" 3 Jaw Thru Hole Hydraulic Chuck w/ 6/5" Hole Through - Option Chip Conveyor Programmable Tailstock Steady Rest Provision with Manual ...
Texas, USA
Tip: Enter manufacturer, model or keyword