NAGEMA Wittenberg GM 421.A
used
- Manufacturer: Nagema
Drive 2 x 5.5 kW C2 pair of smooth rollers D250 x 600 mm C3 pair of smooth rollers D250 x 600 mm COMPLETE PLANT OF WHEAT BURNING (2 x roller mill, plan sifter, cyclone separator, separator lock, filter, fan)
Gossau, Switzerland
NAGEMA Wittenberg GM 421.A
used
- Manufacturer: Nagema
Drive 2 x 5.5 kW B1 pair of corrugating rolls D250 x 600 mm, 6.7 Ri/cm, 6% twist, angle 30°/65°, 1:2.5 Spare pair of rolls, 3.8 Ri/cm, 4% twist C3 pair of smooth rolls D250 x 600 mm Pair of spare rolls COMPLETE W...
Gossau, Switzerland
BÜHLER DFQB - 300/800
used
- Manufacturer: Bühler
Squeezing Roller Mill Roll dimensions D x L = 300 x 800 mm V-belt drive 15 kW Infeed feeder 0.37 kW Feed roller / segment slide Scraper knife at discharge
Gossau, Switzerland
Gossau, Switzerland
MAIER JCB.S
new
- Manufacturer: Maier
Single-shaft tuber breaker design The solid welded construction can optionally be equipped with different tools, tailored to the product to be shredded. The stator is adapted to the rotor-specific tool. Due to th...
Gossau, Switzerland
MAIER JDP.S
new
- Manufacturer: Maier
Corner depot design Angular depots are often attached to the floor or ceiling via four or more support brackets and supports or suspensions. Since depots with a square cross-section, be it square or rectangular, ...
Gossau, Switzerland
MAIER JSO.S
new
- Manufacturer: Maier
Corner - silo design If the space is to be used optimally, a storage silo with a rectangular cross-section is the best choice. In the case of angular silos, it is important to ensure that the pressure in the silo...
Gossau, Switzerland
MAIER JEMA-Quattro
used
- Manufacturer: Maier
2 roller pair D250 x 1000 (horizontal) Drive 2 x 7.5 kW Belt drive with oil bath transmission Parallel grinding gap adjustment (manual) Overload Spring protection Scrap feed with width distribution Variator drive...
Gossau, Switzerland
Tip: Enter manufacturer, model or keyword