Used compacteren in Bremen, Germany

310 liter insulated pressure tank, Aisi 316

remarks: Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

1251 liter IBC container made of stainless steel 316

• Manufacturer: Azzini

remarks: Frame, Fe (galvanized); outlet 2"; small dents possible; certificates of inspection mostly available (for 5 the of the containers is stated in the certificates of inspection as material AISI 304; however...

100 liter mobile pressure tank, Aisi 316

max. allowable working temperature: 50 °C remarks: Loose mobile frame, Aisi 304 with 5 plastic rollers; 1 hand hole diameter 125 mm in the upper bottom; Small dents in the cylinder; Dents in the cylinder/upper bo...

10000 liter tank, Aisi 304 with agitator flange

remarks: Slight differences in design, e.g. B. outlets; rectangular opening approx. 600 x 600 mm in the upper bottom; various small rust spots on the outside (see photos); 2 tanks with a dent in the cylinder; con...

16000 liter agitator tank, Aisi 304 with jet stream mixer

remarks: Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing agitator features...

13500 liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket, Functionality of the double jacket not che...

70800 liter storage tank, Aisi 304

• Manufacturer: Gross Apparatebau

remarks: manhole approx. 350 x 450 mm in the front bottom; one tank (9540-1) with a small dent under the wooden cradle, one tank (9540-2) without a nameplate, up to 4 additional identical tanks could be made avai...

5000 liter tank, Aisi 304

remarks: Diameter manhole upper bottom appr. 425 mm, manhole cylinder appr. 310 x 425 mm; small dents in the cylinder EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking ...

1000 liter container, Aisi 316

• Manufacturer: BSI Biemont Soneco Industries

remarks: Frame, Aisi 304; Manhole diameter approx. 505 mm; 1 small part of the containers is slightly higher with a total height of approx. 1,720 mm; smaller dents in the lower bottom; Outlets slightly pressed in...

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

100000 liter heat-/coolable tank, Aisi 316

max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil remarks: Partially small d...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

5320 Liter pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 415 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new r...