Used compacteren in Bremen, Germany

1000 liter tank, Aisi 304

remarks: Manhole diameter approx. 440 mm (manhole cover is loose); tank with small dents

12000 liter tank, Aisi 316

remarks: smaller dents in the cylinder; small rectangular sheets were welded in by the previous operator in several places of the cylinder

1000 Liter IBC Container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized); 1 additional manhole cover with built-in Liquifant; small dents in the upper bottom (see photos)

3500 liter agitator tank, Aisi 304 with propeller agitator

remarks: 1 stronger dent in the transition from cylinder to upper bottom; small dents in the cylinder; Foot reinforcements, Fe; Outlet extension bent

67000 Liter storage tank, Aisi 316

• Manufacturer: BERTSCH

max. allowable working temperature: 100 °C remarks: Total height as per drawing (small deviation possible); manhole cylinder NW 600

500 liter IBC container, AISI304

• Manufacturer: Thielmann (UCON)

remarks: Frame, Fe (galvanized; slight signs of corrosion, partly slightly bent); small dents possible; partly slight adhesions inside the container

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

1100 liter insulated pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C remarks: Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos)

600 liter pressure tank (separator), Aisi 316

max. allowable working temperature: 95 °C remarks: 2 support brackets, stainless steel; 1 piping inside the tank; small dents in the insulating jacket

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

200 liter open rectangular tub, Aisi 304

remarks: Basic dimensions inside approx. 1,000 x 1,000 mm; Interior height approx. 190 mm (slight gradient towards the outlet); small dents in the bottom (see photos)

100 liter mobile tank, Aisi 316

remarks: Loose mobile frame, Aisi 304 with 5 plastic rollers; 1 hand hole appr. 80 x 95 mm in the upper bottom; Small dents in the tank

17620 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: AURICH Edelstahl GmbH

max. allowable working temperature: 95 °C remarks: Manhole diameter approx. 510 mm; height-adjustable screws of the feet are no longer present; 1 small pressure point in the insulation jacket

10600 liter storage tanks with TÜV documents, Aisi 304

• Manufacturer: Hagemann

max. allowable working temperature: 100 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Manhole diameter 500 mm; Small dents in the cylinder; Differences in the...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...