Used compacteren in Bavaria, Germany

1998 Prinzing RM 52/103 rotary machine
- Manufacturer: Prinzing
Used Prinzing 3-roll rolling machine, with wire insertion grooves, folding groove, back roller manual feed, wheel with scale. The machine will be professionally repaired, tested, and cleaned, and will then be f...
Hohenbrunn, Germany
1998 Geka RM 50 rotary machine
- Manufacturer: Geka
Used Geka three-roll rotary cutter with folding groove and wire insertion grooves. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perf...
Hohenbrunn, Germany
1970 Combination rounding and beading machine 1000mm
- Manufacturer: Beutler
Used 3-roll bending machine, with beading device 1080mm, bar diameter 14mm, Machine is sold as is, without warranty.
Hohenbrunn, Germany
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany
1987 Biegemaster BMTH 8 Meter
- Manufacturer: Biegemaster
used 8-meter Biegemaster long bending machine, with electric cutting device, with 10 column units, with motor shears, new control with memory and bending parameters (AMS-Pronto), without stop. Bending performan...
Hohenbrunn, Germany
1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany
2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany
1998 Jorns NL100-SM CNC400 6x1,25
- Manufacturer: Jorns
used Jorns bending machine Foot pedal, program control without stop, emergency/stop rail, The machine has been repaired, checked, and cleaned by a specialist and is fully functional. Test run was carried out.
Hohenbrunn, Germany
2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany
1998 Long bending machine Jorns NL100-SM CNC400 6x1.25
- Manufacturer: Jorns
Used Jorns press brake, foot pedal, program control without stop, emergency stop rail. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be ...
Hohenbrunn, Germany
1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany
2006 Long bending machine Jorns ML 150-SW-SM-CP200-6.4-hs
- Manufacturer: Jorns
Used hydraulic Jorns swing bending machine with new CNC CP200 control (control upgrade in 2025), motorized depth stop with four stop units, hydraulic material thickness adjustment, manual upper jaw preload (crown...
Hohenbrunn, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany