Used Processing in Poland

VICTOR MSZ 30

• Manufacturer: Victor

was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...

ZWUT PSK-1

• Manufacturer: ZWUT

was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...

GT85 GT 2000-3P ultrasonic cleaner

The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...

MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P

• Manufacturer: Mayer

of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

2021 RYCSYSTEM

• Manufacturer: RYCSYSTEM

The bottling line is used for automated dosing, then filling and labeling of liquid products. These can be food products such as juices and beverages, as well as other products (chemicals, cosmetics, pharmaceutic...

2020 WENZHOU FURI MACHINERY CO. LTD. FRTB-SD3-C

• Manufacturer: WENZHOU FURI MACHINERY CO. LTD.

DIGI AW-5600FX

• Manufacturer: DIGI

DIGI AW-5600FX packaging machine

2020 AULONA MACHINERY S.r.l MPB – 25

• Manufacturer: AULONA MACHINERY S.r.l

2022 TOYO MACHINERY&METAL CO., LTD. Japonia Si-350-6S/JH750E

• Manufacturer: Toyo

Clamping force: 3430 kN | Screw diameter: 60 mm | Injection speed: 300 mm/s | Injection pressure: 220 MPa | Control: SYSTEM 800, Euromap 67, Euromap 73 interface

2019 HAITIAN JUPITER JU III 5500 / 3430

• Manufacturer: HAITIAN

Screw model ϕ 80 mm B Clamping force: 5500 kN | Injection weight: 1830 g | Injection pressure: 159 MPa | Installed power: 59 Kw | Max mold height: 900 mm | Ejector stroke: 250 mm | Ejector force: 110 kN | Mold op...

2021 GUDEPOL GD-SMART 11/10

• Manufacturer: GUDEPOL

Motor power: 11 kW | Maximum pressure: 10 bar

Set of injection molds for a CHILDREN'S TRICYCLE toy.

The set includes: - injection mold for INNER REAR WHEEL, - injection mold for INNER REAR WHEEL, - injection mold for INNER FRONT WHEEL, - injection mold for OUTER FRONT WHEEL, - injection mold for WHEEL CAP (fron...

TOY INJECTION MOLD SET: TROLLEY WITH HANDLE + DAISY WHEELBAR WITH SHOVEL AND RAKE.

The set includes: - Injection mold for the trolley body, - Injection mold for the trolley handle, - Injection mold for the wheelbarrow body, - Injection mold for the wheels (for wheelbarrow and trolley), - Inject...