Used Processing in New Jersey, USA

Mixer-Twin Shell & Double Cone 2.8 m3 (100 ft3) Stainless Steel 304 - IPP# 94105

• Manufacturer: Patterson Kelly

double cone blender 72" dia, 1-8" top, 1-8" btm, 1-12" on str side. Shell driven by 10 HP, 3/60/440 volt 1800 rpm motor thru Falk reducer, 100 rpm output Mtd on A-frame stands.

Stainless Steel 304 Mixer-Twin Shell & Double Cone - IPP# 238390

• Manufacturer: Gemco

with #4 finish for product contact, sanitary double cone blender, Rated for max. density 70 lbs./cu. ft., Rotation from drive side is clockwise, speed is 11.3 rpm. Agitator speed is 3300 rpm. With sanitary Gemcom...

Stainless Steel 304 Gemco HT-SP-AGII Mixer-Twin Shell & Double Cone - IPP# 210319

• Manufacturer: Gemco

Porta Hopper double cone Blender with intensifier bar with (2) Hopper bottoms. Intesifier bar is set up for dry mixing, has liquid capabilities 56" diameter shell gear head motor for blender drive. Blend speed 13...

Mixer-Double Arm 946.4 L (250 gallons) Stainless Steel 316 - IPP# 89444

• Manufacturer: Werner & Pfleiderer

jacketed sigma blade mixer. bottom discharge with valve. Mixing bowl 1300mm long x 1100mm wide x 900mm deep. 250mm diameter center bottom outlet. 1:1 ratio pulleys, connected to double reduction gear, coupled to ...

Mixer-Double Arm 25 L (6.6 gallons) Stainless Steel 321 - IPP# 705836

• Manufacturer: Baker Perkins

Mixer type: Baker Perkins wings twin shaft mixer trough 330mm wide x 400mm long x 320mm deep shafts driven by a hydraulic motor, Motor model B060/P pressure 1000 psi, hydraulic motor is driven by a hydraulic powe...

Mixer-Double Arm 431 L (113.9 gallons) Stainless Steel 316 - IPP# 703788

Trough size 39 1/2" long x 27" wide x 27" deep. 316 stainless steel body with carbon steel ends plates. (2) carbon steel sigma blades. Geared both ends. Unit has 90 degree tilt mechanism which is gear driven by 1...

Carbon Steel Mixer-Double Arm - IPP# 212418

• Manufacturer: JH Day

Double Arm Mixer Mogul line heavy duty design jacketed trough with vacuum hood, cored shafts with double nobben blades for extra shearing actions tangential shaft design packing glands on shafts Front agitator ra...

Carbon Steel Mixer-Double Arm - IPP# 212412

• Manufacturer: JH Day

Mogul line heavy duty design with double nobben blades for extra shearing actions, tangential shaft design, packing glands on shafts Front agitator rated 30 RPM, rear agitator rated 20 RPM Unit designed for tilt ...

Mixer-Double Arm 567.8 L (150 gallons) Carbon Steel - IPP# 212413

• Manufacturer: Baker Perkins

Sigma Blade Mixer jacket trough, tilt discharge. With tangential sigma blades, packing glands on shaft, rated atmospheric internal, with dust cover. Geared both sides, driven through a jack shaft, with chain and ...

Carbon Steel Mixer-Double Arm - IPP# 212411

• Manufacturer: Baker Perkins

Sigma Blade mixer Jacket trough, with inside dimensions approx 56" long x 50" wide x 48" deep, bolted sides Unit is geared one side, with chain and sprocket drive 230/460 volt Amperage is rated for 174/87a Vessel...

Mixer-Disperser 2.6 kW (3.5 HP) - IPP# 219081

• Manufacturer: Fluid

mobile disperser 25mm diameter x 800mm long stainless steel shaft with a 150mm diameter sawtooth blade Motor: 290/500 volt manual rasie/lower mechanism

Mixer-Disperser 17.5 kW (23.5 HP) Stainless Steel Austenitic - IPP# 219063

• Manufacturer: Drais

disperser/disolver 50mm diameter x 800mm long shaft with 350mm diameter double saw tooth blade 470-1700 rpm shaft speed built on controls, with bowl holding/clamping mechanism, can use 250 ltr upt to 600 ltr bowl...

Mixer-Continuous 37.3 kW (50 HP) Stainless Steel 304 - IPP# 23133

• Manufacturer: Strong Scott

Unit driven by Reeves varidrive 50 HP, max 1222 rpm, min 132 rpm. 14" dia x 42" low chamber. Drop door style. Packing gland on shaft.

Mixer-Continuous 55.9 kW (75 HP) Stainless Steel 304 - IPP# 92819

• Manufacturer: Baker Perkins

ko-kneader kneading chamber. Cored shaft, jkt chamber

Mixer-Continuous 65 kW (87.2 HP) - IPP# 99779

• Manufacturer: Buss

****Buss kneader Oil pressure 6 bar @ 250 deg C water pressure 20 bar @ 200 deg C SS screw cored for steam heating, screw 140mm dia screw casing w/hinge (2) heating zones, (1) cooling zones. Screw driven by Mille...