Yushin HOP III M750 Robot Sprue Picker Pick Place Gate Remover Plantstar Mold
- Manufacturer: Yushin
Up for sale is a used Yushin robot, model HOP III-M750. 110 volt. 1.5 maximum cfm. 60 lbs max load. Includes Plantstar control and HOP Series Handy Controller as pictured. This was removed from operation onc...
$1,800 USDSanta Clarita, CA- Trusted Seller
Mill, Disintegrator, 6", Bar Export, Model 400 Grinder, 1 HP, Stainless Steel, #5991514
- Manufacturer: Bar Export
Bar Export disintegrator mill, model 400 Grinder, angle-mounted, with 6" diameter grinding chamber and 10" diameter conical stainless steel feed hopper reducing to 3" inlet. Driven by 1 HP Baldor motor, 230/460V,...
Brisbane, CA - Trusted Seller
Oven, Despatch, 18" x 26" x 22", Stainless Steel, 500 degrees. Fahrenheit, #5991259
- Manufacturer: Despatch
Despatch Chamber oven, LCC series, model LCC-1-54-2, with stainless steel interior measuring 18” W x 26” H x 22” D. Equipped with two 17” x 19.75” trays and capacity for up to 11 trays. Includes a Honeywell chart...
Brisbane, CA - Trusted Seller
Feeder, Rotary, Pocket, Champion, Model HRF-15, 1 HP, #5991135
- Manufacturer: Munson
Champion Rotary Pocket Feeder, HRF-15, equipped with a 1 HP motor running at 1730 RPM. Features sturdy construction for reliable performance.
Brisbane, CA - Trusted Seller
Scrubber, Air, 24" x 24" x 10', Stainless Steel, American Air, #5990980
- Manufacturer: American Air Scrubbers
American Air Scrubbers model Aria 2000 air scrubbing tower with approximately 24" x 24" x 10' high stainless steel housing. Internally includes Cincinnati fan. Fan used to pull air through bottom mounted HEPA fil...
Brisbane, CA - Trusted Seller
MJK1807 Budzar process chiller
- Manufacturer: Budzar
Budzar process chiller Description: Largest motor 15 hp Enclosure type NEMA1 Cooling capacity 1.95 TR -100 Fahrenheit. Pump rating, 12/2 to GMT at 164/59TDH Process fluid SYLTHERM XLT Skidding and Load out charge...
Los Angeles, CA - Trusted Seller
1000 USG vertical cylindrical process tank
- Manufacturer: Hongda
SS316L material, sweep agitator Jacket: Steam jacket with ASME-U1 stamped and NB registered rated at 80 PSI. | Cip: Yes, and double sprayball. | Motor: 5HP Nord brand drive
Ontario, CA 
Process Technology 32" PTFE Immersion Heater IH3000
- Manufacturer: Process Technology
Tube-length-in: 29 | Length: 32 | Watts: 4000 | Volts: 480 | Phase: 1 | Material: PTFE | Amps: 8.33 | Amps range: 0-999
$1,000 USDOceanside, CA
Process Technology 32" PTFE Immersion Heater IH3018
- Manufacturer: Process Technology
Tube-length-in: 29 | Length: 32 | Watts: 6000 | Volts: 480 | Phase: 3 | Material: PTFE | Amps: 7.2 | Amps range: 0-999
$2,000 USDOceanside, CA
Vanaire 1000 CFM Horizontal Fume Scrubber FS2143
- Manufacturer: Vanaire
Sold As-Is. Model-nbr: CH-2 | Cfm: 1000 | Material: PVC | Hp: 3 | Oad: 156"L x 36"W x 55"H | Volts: 230/460
$4,150 USDOceanside, CA
Viron 7500 CFM Horizontal Fume Scrubber FS2049
- Manufacturer: Viron
Hp: 0 | Cfm: 7500 | Material: PVC | Oad: 122"L x 96"W x 92"H | Weight: 2000
Viron 12000 CFM Horizontal Fume Scrubber FS2099
- Manufacturer: Viron
Cfm: 12000 | Material: PVC | Volts: 208-230/460 | Oad: 200"L x 98"W x 96"H | Weight: 9999
$2,500 USDOceanside, CA
Met Pro 3,556 CFM Horizontal Fume Scrubber FS2107
- Manufacturer: Met-Pro
Cfm: 3556 | Hp: 7.50 | Material: Poly | Oad: 216"L x 46"W x 80"H | Volts: 230/460
Met Pro 3500 CFM 14" Mist Miser FS2114
- Manufacturer: Met-Pro
Model-nbr: MM-014EC | Cfm: 3500 | Material: PVC | Tested by: RJ | Oad: 48"L x 36"W x 36"H
$1,200 USDOceanside, CA
Met Pro 1500 CFM 8" Mist Miser FS2113
- Manufacturer: Met-Pro
Cfm: 1500 | Material: CPVC | Tested by: RJ | Oad: 38"Lx 36"W x 54"H
$950 USDOceanside, CA
Ariel JGD Industrial Compressor
- Manufacturer: Ariel
- Model: JGD
Good condition Ariel JGD Industrial Compressors manufactured in 2011. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
