Used Machine Tools in Texas, USA

Canrig Iron Roughneck TM120

• Manufacturer: Canrig Drilling Tech.

Used in good condition Canrig Iron Roughneck TM120 , Max torque 120 FT-LBS Technical Specifications:

Rebuilt NOV TDS11 Top Drive

• Manufacturer: NOV

Integrated Blowout Preventer (IBOP) Pressure Rating: 15,000 psi

National P400 Swivels

• Manufacturer: NOV

Load capacity: 400 tons | Working pressure: 5,000 psi | Washpipe bore diameter: 3 inches

NOV TDS8S Top Drive

• Manufacturer: NOV

NOV TDS8S Top Drive

100 Ton 5 Sheave Block 28 MM Wire Rope

100 Ton 5 Sheave Block 28 MM Wire Rope Sheave Material: Typically forged or cast steel, designed to withstand high loads and provide durability. Bearing Type: Sheaves may be equipped with bronze bushings or rolle...

NOV TDS11 High Torque Top Drives, 1200 HP

• Manufacturer: NOV

NOV TDS11 High Torque Top Drives, 1200 HP. Both Top Drive are 100% Dyno Test Integrated Blowout Preventer (IBOP) Pressure Rating: 15,000 psi

Hydralift 1000 Ton Traveling Block

• Manufacturer: American Block

Manufacturer date: 2019-09-18 | Load capacity: 1,000 tons | Number of sheaves: 8 | Sheave diameter: 72 inches | Wire rope diameter: 2 inches | Weight: Approximately 38,500 l

IECS 4X3 SCR House

Input voltage: 600 VAC, 3-Phase | Input current: 980 Amps​ | Output voltage: 750 VDC​ | Output current: 1200 Amps​

Ideco 3000 Drawworks

• Manufacturer: Ideco

Rated power: 2,000 to 4,000 horsepower (HP)​ | Drilling depth capacity: 20,000 to 35,000 feet​ | Drum configuration: Single drum design

National Oilwell Varco Hydra Tong MPT KT 20000

• Manufacturer: NOV

National Oilwell Varco Hydra Tong MPT KT 20000 Key Specifications: Gear Speed: Dimensions:

Continental Emsco 100 TON Block With 8 Sheaves

• Manufacturer: Continental emsco

General Specifications: Sheave Diameter: Typically ranges between 36 inches (914 mm) and 44 inches (1118 mm) for blocks of similar capacity​ Wire Rope Compatibility: Commonly accommodates wire ropes with diameter...

Omron AC VFD House 3×4

• Manufacturer: Omron

Used in very good condition 3x4 Omron AC VFD House, set up for three 3512, TDS11 Top Drive, 2 Pumps 7500 PSI, Drawworks. The house has the 4th cabinet for adding another Genset and 3rd cabinet to add another mud ...

Rebuilt National 1625 Drawworks

• Manufacturer: National Oilwell Varco, Inc

National 1625 Drawworks – Specification Overview Engine & Power System • Drive System: Integrated mechanical/hydraulic drive designed for efficient power transmission and durability under high-cycle duty Torque &...

National 80-UE Drawworks

• Manufacturer: National Oilwell Varco, Inc

National 80‑UE Drawworks – Typical Specifications Engine & Power System • Rated Power: Typically around 800–900 HP (engine selection and configuration may vary) • Drive System: Combines a mechanical drive with hy...

New Surplus Continental Emsco Drawworks C 2

• Manufacturer: Continental emsco

Continental Emsco Drawworks C2 – Specification Overview Power & Drive System • Engine Rating: Typically rated in the 1100–1500 HP range (often around 1200 HP as a mid-point example) • Drive System: Combines robus...

Cincinnati 550 Machining Center

• Manufacturer: Cincinnati
• Model: 550

Good condition Cincinnati 550 Machining Centers available between 1980 and 1989 years. Located in USA and other countries. Click request price for more information.