Used Machine Tools in Indiana, USA

10 Ton H-Frame Manual Hydraulic Shop Press Enerpac Pump and RC1010 Cylinder

• Manufacturer: Enerpac

H frame press opening is 18.75" wide Opening height is adjustable from 11" to 40" Has a 8" x 9" 3/4" plate with a 1" hole Cylinder has a removable attachment Enerpac RC-1010 Single-Acting Alloy Steel Hydraulic Cy...

Mayfran Chip-Tote Hinge Belt CNC Chip Conveyor 68" Infeed 44" Discharge 460V 3PH

• Manufacturer: Mayfran

In Good Used Condition. Tested and cleaned in our shop. Mayfran Chip-Tote Chip Conveyor. If this item ships as Flat Rate Freight please see details in Shipping tab

Shin Myung Magnetic Chip Conveyor with Drag Chain Scraper 14"x51" Infeed 220V

• Manufacturer: Shin Myung

Conveyor In Good Used Condition. Cleaned and tested in our shop. Magnetic bed with drag chain scraper. If this item ships as Flat Rate Freight please see details in Shipping tab

Enomoto Hinge Belt CNC Chip Conveyor 15"x 88" Infeed 46" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute welded on top of frame. Top chute measures 14.5"W at infeed then back to 16" wide. 88"Length 5" Conveyor...

Enomoto Hinge Belt CNC Chip Conveyor 15"x 62" Infeed 30" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute with welded drain trays. This chute can be removed. Add on chute measures 16"W x 12.5"H x 66.5"L Drain ...

Enomoto Hinge Belt CNC Chip Conveyor 15"x 88" Infeed 46" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute welded on top of frame. Top chute measures 14.5"W at infeed then back to 16" wide. 88" Length. 5" Conve...

Oshkosh F2146 Rockwell Transfer Case Hi Low Pneumatic Front Wheel Drive

• Manufacturer: Oshkosh

Used, in Good Working Condition. Removed From a Working Environment. This was a used truck part out. Oshkosh F-2146 Heavy duty truck. This unit has a high low gear selector. Front wheel drive. This is powered by ...

Enerpac CC 24413-HXD240 Hydraulic Torque Wrench 4-1/8" Hex Drive Cassette 105mm

• Manufacturer: Enerpac

In Good Working Condition. Enerpac 4-1/8" (105mm) Hex Drive Cassette for HXD-240 Torque Wrench. 15765 Ft-Lbs max torque. If this item ships as Flat Rate Freight please see details in Shipping tab

Okuma OEO-OKM-MA-1 Oil Controller Chiller Unit 750W Compressor 200V 3Ph 15g Tank

• Manufacturer: Okuma

Used, in Good Working Condition. Removed From a Working Environment. This unit was pulled from a working machine a few weeks ago. Oil stains on outside. Has 15 gallon tank with 2 oil pumps. If this item ships as ...

Hennig 44"x 9' 6"L CNC Chip Conveyor 40"Belt 40" Discharge 230/460V 3PH 8FPM

• Manufacturer: Hennig

Condition: In good working condition, cleaned and tested in our shop. Set up with E-stop and forward/reverse switch. Drive type, motor specs: Chain drive. 1/4Hp 208-230/460V 120:1 Gearmotor Voltage tested at an...

Chip Blaster JV40MAK Coolant System High Pressure Pump 480V 40LPM Dual Filter

• Manufacturer: ChipBlaster

Used, in Good Working Condition. Removed From a Working Environment. Recovery System for a Chip Blaster 480V 3 phase High pressure plunger pump. 7.5hp Model 2119 8x34" Filter housing. 48x24x22" coolant holding ta...

Enomoto CNC Chip Conveyor 16"x 67" Infeed 47-51" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Tested @220V Enomoto Chip Conveyor. 220V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Magnetic Incline CNC Chip Conveyor 11"x 64" Infeed 40" Discharge 230V 3PH

In Good Used Condition. Tested and cleaned in our shop. No tag or brand on conveyor, steel frame magnetic slide type. Welded front leg support is 11-3/4" off the floor. 8"W x 9"H Side infeed access on front and...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 36-42" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute on top with drain trays. This chute can be removed. Add on chute measures 15.75"W x 12.5"H x 66.5"L Dra...

Enomoto Hinge Belt CNC Chip Conveyor 15"x 62" Infeed 40" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute with welded drain trays. This chute can be removed. Add on chute measures 16"W x 12.5"H x 66.5"L Drain ...