Used Machine Tools in Greater Poland, Poland

Masterwood K21 Multi-Spindle Drill

• Manufacturer: Masterwood

MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, quick-release mounting, 32mm spindle spacing, vertical or horizontal drilling, pneumatic clamps, 380V power supply, The machine is full...

Lasm double-sided edge sander

• Manufacturer: Volpato - Lasm

Belt height: 150mm | Oscillation: Mechanical | Electricity demand: 3.6KW | Table adjustment: at an angle | Angle stop: in the countertop

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Ortza 320cm format saw

320cm Ortza Sliding Table Saw 5.5kW main motor, 4 speeds, Scoring saw, 320cm carriage, Right-side culage manually adjustable up to 1300mm, Manually adjustable tilt from 0-45°, Manually adjustable up and down, Mac...

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...

Robland NZ 3800 format saw

• Manufacturer: Robland

Robland NZ3800 sliding table saw with a carriage, scoring unit with a separate motor, carriage length 380 cm, 0-45° tilt adjustment with electrical readout, saw blade up and down adjustment, motorized right-hand ...

Scm 320cm sliding table saw

• Manufacturer: SCM / SCMI

SCM Linvincibile sliding table saw, 320cm carriage, motorically adjustable blade tilt and up/down, motorically adjustable right-hand culage up to 1500mm, 0.75kW scoring unit, 2-axis electrically adjustable, dimen...

Tornado sliding table saw

Main engine: 5.5KW | Rotation speed: 3000, 4000, 5000 | Maximum shield: 400mm | Undercutter: 0.75KW, 120mm | Cart: 320cm | Culaga on the right side: manually adjustable up to 1300mm | Slope: 0-45, manually adjus...

Griggio Unica 500 430cm sliding table saw

• Manufacturer: Griggio

Technical data: The length of the trolley: 430 cm | Engine size: 5.5 KW on inverter | Engine size undercutter: 0,75 KW | Up-down adjustment: Yes, electrically | 0-45° adjustment: Yes, electrically | Cutting width...

Felder Format 4 Kappa 550 sliding table saw

• Manufacturer: Felder

Felder Format 4 Kappa 550 Sliding Table Saw 280cm carriage, 7.35 kW main motor, 1250cm right-hand cutting capacity, three-axis motorized scoring unit, up-down adjustment, motorized tilt, max. blade diameter 500mm...

Kamro sliding table saw

Kamro Sliding Table Saw 150cm carriage, 5.5kW main motor, 2 cutting speeds, 400 blades maximum, manual up-down blade adjustment, 90cm cutting width on the right side, and fully functional.

EMCO EBS 400 band saw

• Manufacturer: Emco

Engine: 1,1KW | Upper wheel: 40cm | Lower wheel: 40cm | Tape: 320cm