Used Machine Tools in Gauteng, South Africa

IWM HYDRAULIC DOOR PRESS

• Manufacturer: Unknown

Fully serviced and quality guaranteed 5 Cylinder press (3 Vertical, 2 horizontal) 380V / 3 phase

IWM R20 ECCENTRIC PRESS

• Manufacturer: Unknown

Adjustable stroke Capacity: 20 ton | Strokes per minute: 150 | Bed: 570 x 440

Free vibrations in a bending beam (SE 110.58)

natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...

Deformation of bars under bending or torsion (WP 100)

elastic deformation of statically determinate or indeterminate beams under bending load Description: Bending and torsion are typical loads to which components are subjected. The resultant stresses and deformation...

Beam on two supports: bending moment diagram (WP962)

application of the method of sections to determine the bending moment Description: WP 962consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point t...

Assembly of bending device (TZ 200.11)

GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...

Graded Control Stone TO BS812-114, EN1097-8 (LAG150/G)

20kg Graded. -10mmSHPP +7.2mm slot Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, t...

PSV Tyred Wheel TO BS812-114, EN1097-8 (LAG139/3)

For Corn or Flour Emery to EN 1097:3, ASTM C29-97, AASHTO T19-93, BS 812, UNI 8520 :6, ISO 6872, CNR N. 62, CNR N. 63, CNR N. 64 Due to the continuous development of our products, the goods supplied may vary in d...

Flour Emery TO BS812-114, EN1097-8 (LAG146)

20kg bag (graded). Used in the second 3 hours of the polishing operation to polish the samples BS812-114. Material Safety Data Sheet available in PDF format Due to the continuous development of our products, the ...

Criggion Stone TO BS812-114, EN1097-8 (LAG151)

20kg ungraded. Used in the Skid Tester for calibration purposes. BS812-114 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Sand Graded for AAV (LAG172)

20kg to BS812-113 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Aggregate Crushing Value (Hardened) TO BS812-110 (LAG157)

150mm ACV apparatus to BS812:110 The 150mm ACV apparatus consists of hardened steel cylinder with a nominal diameter of 150mm, a plunger, baseplate, tamping rod and measure. All surfaces that come into contact wi...

Tamping Rod to BS1881, EN12350-2 (LCN011)

16mm diameter x 600mm long Note: Part number LCN011 covers Tamping Rod only Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Density Bottle 100ml Capacity, With Capillary Stopper (LGP042)

Unadjusted, glass The following density bottles are available from Laboratory Equipment Supplies: Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on th...

Corn Emery (Graded) (LAG141)

20kg pack Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.