Used Machine Tools in Bavaria, Germany

Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany
2023 Swing-Bending Machine SCHECHTL LBX310
- Manufacturer: Schechtl
used Schechtl manual shearing/bending machine, with manual stop 500mm, Year of manufacture: 2023/New/Showroom model with signs of use Machine is repaired, tested, cleaned by a specialist and then fully functional...
Hohenbrunn, Germany
2001 Schröder MAK V swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder motorized swing bending machine with NC program control, 12-fold program, with LCD display for bending and upper beam and positioning stop 10 - 1000 mm, wide and narrow extension rails, The machi...
Hohenbrunn, Germany
2012 Schröder MAK III swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder MAK III swing bending machine, manual bending jaw adjustment, foot pedal, motorized backgauge. The machine has been professionally repaired, inspected, and cleaned and is fully functional. A test ...
Hohenbrunn, Germany
Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany
1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany
2004 Schröder MAK III swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
The used Schröder swing bending machine is a compact and reliable solution for precise bending operations. Equipped with a motorized stop, ball table, and CNC control, it offers user-friendly operation and high r...
Hohenbrunn, Germany
1993 Schröder MAK II swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder motor-driven bending machine, with motorized backgauge, manual bending jaw lowering, foot switch. A new control unit is currently being installed. The machine is being professionally repaired, tes...
Hohenbrunn, Germany
2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany
1995 Dräco K9 double standing seam machine
- Manufacturer: Dräco
Used Dräco K9 double standing seam machine for closing angle and double folds, includes 1 set of cutting rollers for fold removal, including folding rollers. The machine is currently converted to cutting operati...
Hohenbrunn, Germany
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
1998 round bending machine Schwartmanns WSRV 03.2
- Manufacturer: Schwartmanns
used Schwartmanns 3-roll round bending machine, with wire forming grooves, folding groove and swiveling upper glove, rear roller adjustable via the rack, machine repaired by a specialist, tested, cleaned and then...
Hohenbrunn, Germany
1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany
2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 millimeter
- Power requirement: 11 kilowatt
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany
1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...
Hohenbrunn, Germany