Building Filters
- Trusted Seller
1988 Strojaren XONM 2000/2A-5
- Manufacturer: Strojaren
- Power requirement: 1.7600000000000002 kilowatt
HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam ...
Leipzig, Germany - Trusted Seller
1992 Stückmann&Hillen 241 05
- Manufacturer: Stückmann&Hillen
- Power requirement: 4.5 kilowatt
This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters
Leipzig, Germany - Trusted Seller
1982 FASTI 2045 - 15/1,5
- Manufacturer: Fasti
- Model: 2045 - 1515
- Power requirement: 1.3 kilowatt
- adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (peda...
Leipzig, Germany - Trusted Seller
WMW SBM 1000-1
- Manufacturer: WMW
- This swivel bending machine is equipped with two rear supports. Size of the round steel support = Ø 25 x 750mm, with linear scale. - Left side with counterweight.
Leipzig, Germany - Trusted Seller
Folding Machine Hesse+Co GmbH
- Manufacturer: Hesse
- Power requirement: 2.25 kilowatt
Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is mis...
Leipzig, Germany