Used Processing in Japan

[New Stock] Made in Korea 800Ø IDTS800-1
- Manufacturer: IDTS800-1
Available in two different configurations. [In stock] Cassette type Material of contacting parts: SUS304 Frame material: SS400 Frame diameter: 800 Motor: 0.75kW Tapping ball: φ30 Made of silicone This manufacture...
Hiroshima, Japan
[New Stock] Made in Korea 1000φ IDTS-1000-1 to 3
Available in two-, three-, or four-section configurations. All options are available. [In Stock] Cassette type Material of contacting parts: SUS304 Frame material: SS400 Motor: 1.5kW Tapping ball: φ30, silicone T...
Hiroshima, Japan
2008 Nippon Aries Magnetics HS26
- Manufacturer: Nippon Aries Magnetics
Sealed tray 120W x 530L Purchasing area: 50Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
［TOSHIBA] Geared motor No model
- Manufacturer: Toshiba
Reduction ratio 1/10 Frame model No. 80 Power: 0.75Kw4P200V | Material: SS | Quantity saved: 2
Hiroshima, Japan
1997 Lhasa Industry ATS 600 DS
- Manufacturer: Lhasa Industry
Argyre shifter Material of powder contact part: SUS Motor: 0.4kw The oscillating mechanism is more efficient than the vibrating type. The sifting particles do not bounce on the mesh surface as they do in the vibr...
Hiroshima, Japan
1992 Tokuju Kosakusho GS-C2
- Manufacturer: 徳寿工作所
排出口2ヵ所。予備網あり。 [メーカー商品ページURL] Power: 0.75Kw 200V | Material: Gluing section SUS | Quantity saved: 1
Hiroshima, Japan
Tokujyo Corporation GS-B 2
- Manufacturer: Tokujyo Corporation
Material of powder contact parts: SUS 3 outlet ports No screen frame
Hiroshima, Japan
Shintaku Kogyo SKR-12R
- Manufacturer: Shintaku Kogyo
Purchasing area: 60Hz | Material: SUS + resin | Quantity saved: １
Hiroshima, Japan
hot melt
- Manufacturer: Daiichi Bussan Co.
Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
[NDR] Ram Press
- Manufacturer: Daiichi Bussan Co.
Maximum pressure: 6.9 MPa Power: 0.75 Kw / 200 V | Purchasing area: 60Hz | Material: Wetted part SUS · Other SS | Quantity saved: 1
Hiroshima, Japan
1995 Ryosei RD200-2-2.2M
- Manufacturer: 了生
Air volume: 200 m3/min Static pressure: 30 mmAq Shaking type
Kure, Japan
1998 Ebara Corporation ML-320 type
- Manufacturer: 荏原工機
Made of steel, 1 stage, 2 kinds of division Eurus motor Tilting type
Kure, Japan
Joint oil machine KH-2 type
- Manufacturer: KYOD
Pressing pressure: 100TON 2 units 150TON 1 unit 200TON 1 unit Electric heater & steam heating type with hydraulic system Stroke: 500mm Upward moving type
Kure, Japan
1974 Electric guillotine
Width: 550mm × Stroke: 800mm (Effective: 750mm) There is a pain in the blade.
Kure, Japan
Trusted Seller
‘SUMITOMO’ Coil Preparation Line
- Manufacturer: Sumitomo
The Coil Preparation Line, built in 1987 by Sumitomo Heavy Industries, represents a robust solution for processing low-carbon steel with high accuracy and efficiency. This line delivered reliable performance for ...
Japan
Niigata NR282 Injection Molding
- Manufacturer: Niigata
- Model: NR282
Good condition Niigata NR282 Injection Moldings manufactured in 2010. Located in Japan and other countries. Click request price for more information.
Japan