Used Machine Tools in Saxony, Germany

WMW PS 900

• Manufacturer: WMW

Equipment: -4x clamping claws Flange mounting: -Ø inside: 410mm continuous x depth: 50mm -12x clamping holes Ø 26mm, pitch circle Ø 460mm

WMW Niles 250x3-II

• Manufacturer: Niles

three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D.

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

WMW PS 1000

• Manufacturer: WMW

Equipment: -4x external/internal jaws; clamping travel approx. 200mm; clamping range max; approx. Ø 900mm / min. approx. Ø 100mm. -clamping flutes size according to DIN 650: a=22mm; h=43mm; b=40mm; c=16mm x lengt...

Vertical pusher Marav VFS300

Vertical shaping machine Marav (Maschinenfabrik Ravensburg AG) VFS300 used, tested !

WMW DU 250 AS

• Manufacturer: WMW

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck

IMA Norte VS 800 470x340x120

• Manufacturer: Norte

from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm

1970 WMW AP 865x780x40

• Manufacturer: WMW

surface plate with 3 base stands Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 865 mm | Table width: 780 mm | Table height: 40 mm | Height over ...

1987 TOS - KURIM DU 250 AS

• Manufacturer: TOS Kuřim

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...

TOS dividing head

• Manufacturer: TOS

Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Dividing head: Holder: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable Tailstock with quill and fixed center point u...

1985 WMW 3880x1390

• Manufacturer: WMW

distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm

WMW SP 4750x1850x200

• Manufacturer: WMW

steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm

1988 Krups AP 4000x2000x460

• Manufacturer: Krups

2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...