Used Foundry & Casting in Germany

2003 IMR B3R-160

• Manufacturer: IMR

Melting furnace content 2300 kg Installed power 95 kVA Acting power 85 kW Nozzle heating 1.2 m³/h gas EXW- ex Works, as seen without dismantling from Germany

1999 OMS Die Casting Cell

consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...

2007 Frech DAK 580/62 Die Casting Cell

• Manufacturer: Frech

consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...

WEBAC-MICHEL Kugelmischer M 60

• Manufacturer: Webac

Batch max. 60 kg, mixing time 50-70 s, capacity approx. 3 t/h, mixer cover with safety limit switch, cover lifting and swiveling device, pneumatically operated discharge flap, drive power 5.5 kW

1994 WEBAC-MICHEL Kugelmischer M 30-A-2

• Manufacturer: Webac

Batch mixer 30 kg, steel support structure, two-part sand storage hopper, sand dosing, additive hopper with discharge screw conveyor, liquid component container storage, binder dosing system, 2 discharge points, ...

1991 KLEIN STATORMIX 53

• Manufacturer: Klein

Batch mixer 50 kg/ 33 l, two-part storage hopper, sand weigher, liquid component container store, dosing station with 2 bellows dosing units, additive dosing, distribution system with overhead conveyor and bucket...

1978 VOGEL & SCHEMMANN KSM 6.10.02

• Manufacturer: Vogel

Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit

1989 RÖPER / LAEMPE LKV H 5

• Manufacturer: Laempe / Röperwerk

Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...

1988 LAEMPE Kernschießautomat L-5

• Manufacturer: Laempe / Röperwerk

Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R

2013 SEGAB PROMIX 2x 200

• Manufacturer: Segab

Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...

VOGEL & SCHEMMANN MISCHKA II

• Manufacturer: Vogel

Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...

Sand dosing container

Tank for volumetric sand dosing, double conical truncated cone, welded in the middle, capacity approx. 70 l / 100 kg, each with a flange-mounted, pneumatically actuated rotary valve at the inlet/outlet, flange si...

2014 KLEIN Balgdosiergerät BDG 504 (EFV)

• Manufacturer: Klein

Dosing volume 200-500 cm³, electrical (adjustment) remote adjustment (EFV)

2006 KLEIN Balgdosiergerät BDG 304

• Manufacturer: Klein

Dosing volume 200-300 cm³

1993 GTG - Gießereitechnik GÖTZ BDE 2-770/960-A-G

• Manufacturer: GTG - Gießereitechnik GÖTZ

Two-component binder system, metering pumps 770/960 cm³