Used Agitators, Blenders, Mixers in Germany

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

15600 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Behälter KG Bremen

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): squared half-coil temperature control bottom (dj): thermoplate remarks: Manhole diame...

Agitator container THOUET - type RW-3000, with approx. 3,000 kg content.

• Manufacturer: Thouet

The tank is double-walled and constructed of mild steel for heating. Hot water is provided by the installed screw-in heaters. Usable capacity: approx. 3,000 kg

Agitator container THOUET - type RW-3000, with approx. 3,000 kg content.

• Manufacturer: Thouet

The tank is double-walled and constructed of mild steel for heating. Hot water is provided by the installed screw-in heaters. Usable capacity: approx. 3,000 kg

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

630 liter insulated agitator tank, Aisi 304 with propeller agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

67000 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Bertsch

max. allowable working temperature: 100 °C remarks: Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing)

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

12000 liter insulated agitator tank, Aisi 304 with 2 propeller agitators

• Manufacturer: Waldner

remarks: 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chamber...