Used Recycling & Disposal in Germany

Filter Tester - Pall - Flowstar XC - 343912G

• Manufacturer: Pall
• Model: FLOWSTAR XC

We have several units available Update Soon

Filter Integrity Tester Flowstar XC - Pall Filtrations Technik FFS XC - 354216

• Manufacturer: Pall

Filter Integrity Tester Flowstar - Pall GMBH Filtrationstechnik XC Aqua Fit - 353864G

• Manufacturer: Pall

With Water Tank and Rack

2012 Filter Integrity Tester Flowstar - Pall Filtrationstechnik - AW02XC - 400434G

• Manufacturer: Pall
• Model: AW02XC

Filter Housing - Pall - ALTD12GNW25ABH4 - 352792G

• Manufacturer: Pall

Size: 20 Inch | Po: -1/10 Bar G -4.5/150 PSI | To: 10/150 DegC 300 DegF | V: 3.6 0.95 US GAL

2006 NEUE HERBOLD SM 600/1000-G3-3

• Manufacturer: Neue Herbold
• Model: SM 600/1000-G3-3

Friction scrubber/friction separator

• Manufacturer: Neue Herbold

Friction Washer / Friction Separator Friction Washer Type FW 560/3000 with Cutting Mill Type SM 450/1000 Area of Application The friction washers of the FW / FA series are used for washing regrind fractions. This...

Pre-wash screw

• Manufacturer: Neue Herbold

Pre-wash screw – Soaking screw Soaking screw type ES 300 Use of the pre-wash screw The ES series soaking screws are specially designed for the removal (i.e., discharge) of impurities and foreign matter. As a soak...

Cutting mills SX

• Manufacturer: Neue Herbold
• Model: SX

SX Granulators SX Series Technology The NEUE HERBOLD SX series granulators are equipped with double-angle cutting technology. Both the rotating blades and the stator blades in the granulator housing are angled to...

Cutting mill SM

• Manufacturer: Neue Herbold
• Model: SM

SM Granulator SM Series Technology The rotors of the NEUE HERBOLD SM granulators are equipped with double-angle cutting technology. Both the rotating blades and the stator blades in the granulator housing are ang...

screw breaker

• Manufacturer: Neue Herbold

Screw Crushers Technology of the NEUE HERBOLD Screw Crushers The Neue Herbold screw crushers are equipped with screw-shaped shredder shafts that operate in pairs. The shredder shafts are mounted in a welded, trou...

Mechanical step dryer T

• Manufacturer: Neue Herbold

Mechanical Step Dryer T Use NEW HERBOLD step dryers of the T series were specially developed for the gentle drying of plastic-PET regrinds. They are suitable for removing surface moisture from granular plastics. ...

Tube mills and profile mills SR

• Manufacturer: Neue Herbold
• Model: SR

SR Tube Mills and Profile Mills Areas of Application of the NEUE HERBOLD Tube Mill Profile Mill SR The NEUE HERBOLD SR series granulators can shred thick, long pipes and profiles. The horizontal feeding allows lo...

Cutting mill LM

• Manufacturer: Neue Herbold
• Model: LM

LM Granulator NEW HERBOLD Granulator Technology The LM granulator is equipped with a "double-angle cut" geometry. The rotor blades and the opposing stator blades are angled to each other in the mill housing. This...

Profile mill LP

• Manufacturer: Neue Herbold
• Model: LP

LP Profile Mill LP 450/600 Application of the NEUE HERBOLD LP Profile Mills The NEUE HERBOLD LP series granulators can be used to reduce long PVC profiles or profile waste, such as window profile rods. The profil...