Used Presses in Germany

Hess Mobil edge press 96656

• Manufacturer: Hess

Workpiece height min- max mm: 60 | Solid edge preheating device and heating element: Yes | Working length mm: 1.100 | Working width mm: 1.100 | Landing gear: Yes | Swiveling design: Yes | Cylinder piece: 2

1995 Hess frame press 99722

• Manufacturer: Hess

Workpiece width min-max mm: circa 1500 | Workpiece length min- max mm: 2500 | Workpiece height min- max mm: 10-90 | Working width max mm: 2500 | Hydraulic/pneumatic: electrical

METALLKRAFT WPP 50 BK Workshop Press / Hydraulic Press

• Model: WPP50BK

Power/Capacity: 50t; Serial No.: PF201669; including box with spare mandrels; for more details see photo of the nameplate; Piston travel: 500mm; maximum load prism jaw: 12.5t; for more details see photo of the ma...

KOCH Screw Press

• Manufacturer: Koch

Table dimensions: 370 x 230 mm with 1 groove

1981 Hydraulic deep-drawing press LAUFFER 400t

• Stroke length: 800 millimeter
• Daylight: 850 millimeter

Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used.

LINDENBERG WSP Workshop Press - 1986

• Manufacturer: Lindenberg
• Model: WSP

Serial number: 1368 Pressing force: 15 tons Dimensions of the storage area: approx. 750 x 150 mm

2016 FAGOR LE4-2000-5000-2500 Double Column Drawing Press - Mechanical

• Manufacturer: Fagor
• Stroke length: 325 millimeter

Modern mechanical link-drive press for tool tryout operations in pristine condition. ONLY: 62.500 strokes !!! Featurtes: Moving bolster, hydraulic cushion ( 4 Cylinder ) in table section, mico-inch mode, single s...

2001 Hydraulic press SACK & KIESSELBACH TRP 200

Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under powe...

WMW Press

• Manufacturer: WMW

Hydraulic single-column press WEMA ZEULENRODA PYE160/S/1M conventional control Without tables can be purchased separately Mechanical ejector available

SOM TEC Press

Hydraulic press SOM TEC VSF 1 passage height 520 mm conventional control Description 950 kN press serves as a shaping machine for ceramic laminates, in which tool carriers with adjustable pins press from above ag...

W+B test press

Hydraulic test press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 380 V

REMAK hydr. press

Hydraulic press REMAK ESM12 used , tested ! Dimensions: 1,550 x 850 x 2,000 mm

Hydraulic Press

Maximum working pressure: 250 bar Table dimensions: 300 x 300 mm Presser diameter: 120 mm Cylinder diameter: 110 mm Approximate vertical travel: 300 mm Manual operation Dimensions: 870 x 500 x 2350 mm Approximate...

GIESBERT SPP-16/70 Screw Press - 1970

Machine Number: 827170-4331 Cutting surface: 400 - 1 mm2 Working stroke: 250 mm Print capacity: 16 Table dimensions: 460 x 390 mm