Used parallel in Japan

Kubota Tractor KT30F Cabin

30 PS Diesel Engine Operating Time: 553 hours Included Features 4WD Switch Front-wheel drive can be switched on and off. Can be switched to 2WD when driving only. Differential Lock Connects the rear wheels for ea...

Yanmar tractor EG228 + Yuki loader YK240

28PS Diesel Engine Operating Hours: 1h + 549h (The engine rpm indicator would sometimes move and sometimes not, so I replaced it at 549h.) *See the before photo below* Included Features Full-time 4WD Always in 4W...

Yanmar Tractor EG224

24PS diesel engine Operating time 410h Included features Full-time 4WD Always in 4WD Differential lock Used to turn rear wheels in coupled rotation to exit soft fields (low speed steering wheel straight ahead onl...

Kubota Tractor KL34R Cabin

34PS diesel engine Hours of use 611h Included features 4WD Switching Front-wheel drive can be switched on and off. Can be set to 2WD for driving only. Differential lock Rear wheels can be linked and rotated for u...

Furukawa Manufacturing Co., Ltd. FVM-WM

• Manufacturer: Furukawa

Power supply: Single phase 200/220V 50/60Hz | Electric power: 1.6kW | Ability: 1-2 processes/min | Vacuum box dimensions: Width: 715mm (from instruction manual) Length: 930mm (from instruction manual) Depth: 230...

Makita KS002GRDX

• Manufacturer: Makita

Revolution speed 7,500min-1 (in speed mode). Cutting speed is approximately 10% faster than our AC machines. Battery BL4025 x 2, Battery charger DC40RA, Case, Hexagonal wrench 5, Parallel ruler Chip saw is not in...

Makita KS001GRDX

• Manufacturer: Makita

Revolution speed 7,500min-1 (in speed mode). Cutting speed is approximately 10% faster than our AC machines. Battery BL4025 x 2, Battery charger DC40RA, Case, Hexagonal wrench 5, Parallel ruler Chip saw is not in...

Makita CS003GRDX

• Manufacturer: Makita

Maximum cutting depth 46mm Ideal for cutting metal studs, carbon steel pipes, etc. Battery BL4025 x 2, Charger DC40RA, Case, DC White Metal Chip Saw 125 (A-74538), Hexagonal Bar Wrench 5, Parallel Ruler, Safety G...

Makita CS001GRMX

• Manufacturer: Makita

Maximum depth of cut 67mm With a blade diameter of 185mm Capable of cutting 65 x 45mm square studs in one shot at a time Battery BL4040 x 2, Charger DC40RA, Case, Chip Saw Blade 185 (A-73586), Hexagonal Bar Wrenc...

Makita HS001GRDX

• Manufacturer: Makita

Cutting speed increased by 65%! By maintaining a constant rotation speed during cutting and beautifully ground surface. Ideal for remodeling and interior work. Battery BL4025 x 2, Battery charger DC40RA, Case, Sh...

Makita HS001GRDXB

• Manufacturer: Makita

Cutting speed increased by 65%! By maintaining a constant rotation speed during cutting and beautifully ground surface. Ideal for remodeling and interior work. Battery BL4025 x 2, Battery charger DC40RA, Case, Sh...

Makita HS002GRDX

• Manufacturer: Makita

Cutting speed increased by 65%! By maintaining a constant rotation speed during cutting and beautifully ground surface. Ideal for remodeling and interior work. Battery BL4025 x 2, Charger DC40RA, Case shark skin ...

Agilent 82357B

• Manufacturer: アジレント

USB/GPIB Interface Interface: USB2.0 interface (USB1.1 compatible) and IEEE-488 interface Maximum transfer rate: 1.15MB/s USB2.0 High Speed and Full Speed support Parallel polling function Power supply: USB bus-p...

Orion Machinery Co., Ltd. RKS1500G-MV

• Manufacturer: Orion Machine Co., Ltd.

Power supply: Three-phase 200V (50/60Hz), three-phase 220V (60Hz) | Power consumption: 1.7kW/1.9kW, 1.9kW | Current: 6.6A/7.2A, 7.2A | Power capacity: 3.9kVA (manufacturer catalogue specs) | Cooling capacity: 4....

TURBOVAC SB-800-KK

• Manufacturer: Turbovac

Power supply: Three-phase 200V | Outside size: Width 870 x Depth 680 x Height 1030(mm) | Seal dimensions: Width 3mm (half round) x length 540mm (2 parallel) | Vacuum box dimensions: 808 (W) x 565 (D) x 140 (mm) ...