Used in Hiroshima, Japan

Trusted Seller
2013 LIEBHERR LTM1220NX-2
- Manufacturer: Liebherr
- Model: LTM 1220
- Capacity: 220,000 kilogram
- Boom length: 60 meter
Full Spec Capacity: 220t | Km: 10,246km | Hr: 6,608hr | Car inspection: 2026/4/4 | Crane inspection: 2026/5/7
Hiroshima, Japan
2016 IHI HS-255L
- Manufacturer: IHI
- Model: HS
4000 rpm/3500 G Nominal capacity: 2.5–3.5 t/h Backdrive specification (can be modified to single-motor specification) Control panel included
Hiroshima, Japan
2024 Tanabe Wiltech SHC-400D
- Manufacturer: Tanabe Wiltech
Material of main parts such as screws: SUS316 (stellited cutting edges). Currently 400V specification, but rewinding to 200V is available. Screen hole diameter 100mm Basket diameter φ400
Hiroshima, Japan
[Tokyo Engineering] Filter Press TFAP7-14
- Manufacturer: Tokyo Engineering
750mm square x 7 chambers (double) Filtration area: Approx. 6m2 (estimated) Accessories: Hydraulic unit
Hiroshima, Japan
Taiko Machinery MDP680
- Manufacturer: Taiko Machinery
Suction 65A/Exhaust 50A 5000L/min, 1.3pa (50Hz) Power: 11kw | Quantity saved: Two
Hiroshima, Japan
Nippon Dryer HF-04
- Manufacturer: japan dryer
Overall dimensions: 2500 x 1100 x 1700H Internal dimensions: 1290 x 790 x 800H = approx. 800L Temperature control: up to 200°C
Hiroshima, Japan
Ikebukuro enamel industry 10000L
- Manufacturer: Ikebukuro Enamel Industry
Capacity: 10000L With drawings Material: Wetted part glass lining | Quantity saved: One | Size: φ2200×5519
Hiroshima, Japan
Osaka Sanitary Vertical Cylindrical Type
- Manufacturer: Osaka sanitary
Jacketed Side vent Agitator mounting base included
Hiroshima, Japan
[Sumitomo Chemical Engineering] Multi-tube heat exchanger 20m²
- Manufacturer: Sumitomo
Heat transfer area: 20㎡ Material: Tube: SUS304 Shell: SS400 Drawings available
Hiroshima, Japan
[Nisso Engineering] Multi-tube heat exchanger 20m²
- Manufacturer: Nisso Engineering
Heat transfer area: 20 m2 Material: Tube: STB340-SC Shell: SUS304 (bolts and nuts: SS)
Hiroshima, Japan
Osaka Sanitary Vertical Cylindrical Type
- Manufacturer: Osaka sanitary
Jacket and agitator (motor not included) Open sides/bottom
Hiroshima, Japan
Osaka Sanitary Vertical Cylindrical Type
- Manufacturer: Osaka sanitary
Jacketed and agitated (0.4kw) Side/bottom opening Power: 0.4kw 4p | Material: SUS | Quantity saved: One | Size: External dimensions: φ900 x 2100H (including legs)
Hiroshima, Japan
1998 Nakamoto Iron Works Vertical cylindrical type
- Manufacturer: Nakamoto Iron Works
Capacity: 5800L Product Weight: 1800kg Design Pressure: FV~1.9kgf/cm2G Design Temperature: 100°C Test Pressure: 2.9kgf/cm2G
Hiroshima, Japan
Osaka Sanitary Vertical Cylindrical Type
- Manufacturer: Osaka sanitary
Jacketed Side cutout Material: SUS | Quantity saved: One | Size: φ1100×2200H (including legs)
Hiroshima, Japan
Sue Hiro α-600-E-12
- Manufacturer: Suehiro
Motor: CD-407B Power: 75kw/220V | Material: Gluing section SUS | Quantity saved: 1
Hiroshima, Japan