Used Grinding Machines in Massachusetts, USA

Kellenberger Kel-Varia UR 175/1000 Universal Grinder CNC 1997 Hardinge HYDRAULIC CYLINDRICAL GRINDER MAKE OFFER!!!

• Manufacturer: Hardinge

This is a Kellenberger Kel-Varia UR 175/1000 Universal Grinder,1997... this unit was running perfectly when removed from service. MAKE OFFER!! NOTE: We also have an Electronic Frequency Converter to convert 440V...

Norton 6x18 Automatic Surface Grinder with Mag Chuck Hydraulic

• Manufacturer: Norton

This is a Norton 6x18 Automatic Surface Grinder with Magnetic Chuck... this unit was running fine when removed from service. - Hydraulic - 2 axis automation, manual Z wheel - 220 / 440 volts 3 phase WSPT# LGD-0...

1954 Cincinnati No.1 Centerless Grinder

• Manufacturer: Cincinnati

Capacity w/ std thrufeed & infeed work rests: 0 – 1-1/2" | Diameter: . 7"min./9"max | Width: 4"max | Hole: 4" diam | Recessed both sides: 5-1/2" diam. x 5/8" | Grinding wheel motor: 7-1/2 Hp | Regulating wheel m...

Roll Grinding System #46127

Roll Grinding System with Associated Components And Controls, Max Roll Diameter 50", Max Roll Length 35', Max Roll Weight 20 Ton

1980 Kao Ming 40S Tool and Cutter Grinder

• Manufacturer: Kao Ming
• Model: 40S

Tilting wheelhead (15 deg. above & below) Duplicate controls @ the front & rear of the table Ball bearing anti-friction table rolling in replaceable hardened steel v-ways 360 deg. Eccentric wheelhead & swivel tab...

Norton 10" x 36" CTU Universal Cylindrical Grinder.

• Manufacturer: Norton

Max. diam. ground: 10.5" | Distance between centers: 36.5" | Grinding wheel size (standard): 30" x 5" x 12" | Grinding wheel speed: 1,800 rpm | Table speeds (infinitely variable): 2 – 240 ipm | Table swivel: 3.5...

Cincinnati Milacron 107-4

• Manufacturer: Cincinnati
• Model: 107-4

Cincinnati 107-4 Centerless Grinder (3 Available) Cincinnati 107-4, s/n 1M4H5S-29, 1M4H5S-30, 1M4H5L-2, (3) Available

1997 Okamoto ACC20-36DX

• Manufacturer: Okamoto
• Model: ACC-20-36DX

20" x 36" Surface Grinder Used Okamoto ACC20-36DX Metalworking Plastic Machines for sale. This pre-owned machine is a 1997 model and is available all over the US

1998 Bridgeport Harig EZ Surf

• Manufacturer: Bridgeport
• Model: EZ-Surf

6" X 18" Surface Grinder Used Bridgeport / Harig EZ Surf Metalworking Plastic Machines for sale. This pre-owned machine is a 1998 model and is available all over the US

Shigiya GUA-30.60 12" x 24"

• Manufacturer: Shigiya

Hydraulic operation featuring: Power table traverse. Adjustable table dwell. Auto infeed. Dual rate (coarse/fine) plunge infeed. Rapid wheelhead advance & retraction. Independent sparkout timers for auto i...

Blanchard 36-60 60" Vertical Spindle

• Manufacturer: Blanchard

Segmented wheel chuck (8 segments) Recently scraped and slip sheeted(Turcite) table bearing surface Recently replaced guards Recently replaced electrical wiring Concrete filled base with channels for coolant ...

Shigiya GUA27-100 10.6" x 39"

• Manufacturer: Shigiya

Full automatic cycle with sparkout and timers. Rapid wheel head traverse. Plunge grinding. Table-mounted wheel dresser. Automatic drive dog set. (2) Two point steady rests. Centers. Coolant system.